+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setup (/showthread.php?tid=2652)
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - 4WayDiablo - 09-04-2012
Matty Wrote:I'll be honest. I think 180bhp at 25-30psi is optimistic.Maybe with a few more psi's then haha
But should be about that
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Ricky - 09-04-2012
Matty Wrote:I'll be honest. I think 180bhp at 25-30psi is optimistic.
Yeah probably is a bit high, but i'm sure it will be a lot better than a T2 at that range, better flow lower charge temps..?
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Matty - 09-04-2012
Yes. Exactly.
There's no exact figure really depends on your other setup of intake (restrictive?), free flowing exhaust, plenty of fuelling... etc etc. tmic/fmic/water/meths inj etc
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Ricky - 09-04-2012
I have PM'ed you btw
Hope it sent, it went a bit funny..
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - 4WayDiablo - 09-04-2012
Ricky Wrote:I have PM'ed you btwPm's here are a little funny they go to outbox until they're read then go to sent when they have been read :-)
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Ricky - 09-04-2012
4WayDiablo Wrote:Ricky Wrote:I have PM'ed you btwPm's here are a little funny they go to outbox until they're read then go to sent when they have been read :-)
Ahh ok cheers, must have been read then
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - devils_fuel - 10-04-2012
hey fella, no pm regards seatbelt tensioner
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Matty - 10-04-2012
Sorry guys. Been really busy looking at new cars. Will start PM'ing
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Poodle - 10-04-2012
How's the running gear? Interested in the wishbones and possibly os driveshaft if they've not got many miles on.
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Dave - 10-04-2012
4wayDildo Wrote:Ricky Wrote:What sort of power would a TD04 make at around 25-30psi? (on a 9mm)180 should be with a few other lil mods
A bone stock 9mm pump, with just a hard cut govnor, will flow enough fuel for just over 150hp.
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - londondan86 - 11-04-2012
Soz to hear your breaking the car pal..... Anyhoo, do you have a temp gauge clock mate?
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - ct-hdi - 11-04-2012
Price on splitter?
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - 4WayDiablo - 11-04-2012
Did you wanna split the sub and amp? I'm after an amp? If so what wattage is it?
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Matty - 15-04-2012
Really have no time now. It's going to take a long time for me to get the turbo off as I don't have enough time in one go to sort it or anything else for that matter. Before too long, might just scrap it with the turbo etc on it appears. Depends on how much time I have.
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - devils_fuel - 15-04-2012
No tensioner..
Does it also have a rubber cover on the accelerator pedal?
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - ash23 - 15-04-2012
Matty Wrote:Really have no time now. It's going to take a long time for me to get the turbo off as I don't have enough time in one go to sort it or anything else for that matter. Before too long, might just scrap it with the turbo etc on it appears. Depends on how much time I have.
if your struggling for time im sure me and a mate could help strip it one day ?
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - strictly_perv - 15-04-2012
Like Ash23 says if anyone's interested in bits you could always let them do the work if they are prepared to do it.
It would be silly to scrap it as it is with the spec it has, the turbo alone will fetch more than scrap value of the car..
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Matty - 15-04-2012
Well at the moment, I have no time. If people are prepared to wait until I've got stuff sorted for my new car. Then it will stay. (limited places to park at home at the moment proving a problem) - so need the 306 shifted. Just booked some time off at my part time job that I do on weekends (booked next weekend), so hopefully turbo and other important bits will come off next weekend as I've purposely booked it off just for some time to strip. (the car)
306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setup - ash240970 - 15-04-2012
Has the turbo sold yet?
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - silverzx - 15-04-2012
ash240970 Wrote:Has the turbo sold yet?
Aye.
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Matty - 15-04-2012
Temp sold turbo until it's off and I just quickly check it's condition to make sure I'm happy accepting the money.
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - darrenjlobb - 15-04-2012
Still worth most of that money even if its fooked tbh, people should be paying for the adapters / oil line, not the blower itself, they cost pennys to buy.
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Jonny81191 - 15-04-2012
PM'd
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - devils_fuel - 15-04-2012
Matty Wrote:Well at the moment, I have no time. If people are prepared to wait until I've got stuff sorted for my new car. Then it will stay. (limited places to park at home at the moment proving a problem) - so need the 306 shifted. Just booked some time off at my part time job that I do on weekends (booked next weekend), so hopefully turbo and other important bits will come off next weekend as I've purposely booked it off just for some time to strip. (the car)
if you could get the tensioner in that time off as well would be cool beans
i'm in no rush as its for MOT next year to stop the light flashing, i no the current airbag will be pants as it needed to be replaced 5 years ago lol
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Foxy-jim - 16-04-2012
How much would you want for the central locking motor?
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Dave - 17-04-2012
if your willing to wait till after the start of may, i'll come and strip tons off it
But i'de imagine by that time your old folks be getting abit pissy...
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Matty - 17-04-2012
Let me just see what happens pl0x
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - b1ll5 - 17-04-2012
how much for the bosch pump deliverd to sn15?
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - Matty - 17-04-2012
Make me an offer.
Re: 306 DTurbo S. China. Breaking inc. TD04L/11mm Bosch Setu - ct-hdi - 17-04-2012
what you rekon on price of splitter?