+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: New rose joints for droplinks (/showthread.php?tid=26313)
New rose joints for droplinks - MCH - 27-08-2014
Where's best to get them? and what's the spec as I've forgotten what they were.
I have 2 sets of the phillipm/rippthrough links so its for those ones.
RE: New rose joints for droplinks - C2K - 30-08-2014
Go to your local bearing shop. They'll be off the shelf, will help you get the right ones too.
RE: New rose joints for droplinks - Grant - 30-08-2014
(30-08-2014, 09:24 PM)C2K Wrote: Go to your local bearing shop. They'll be off the shelf, will help you get the right ones too.
This, or if you know the thread size and pitch, then order them up online.
I've used this place, and they are good enough. If they stock what you are after, then I recommend them.
RE: New rose joints for droplinks - allanallen - 31-08-2014
I believe the original joints were from here http://www.mcgillmotorsport.com
RE: New rose joints for droplinks - Rippthrough - 31-08-2014
The ones with original red joints were custom forged by QA1, as they have a larger body and thread than bore, but they can be converted using the joints from the guys above and a pair of their misalignment spacers they now offer - which is what the latest batch use.
RE: New rose joints for droplinks - MCH - 05-09-2014
thanks everyone
