306oc - Peugeot 306 Owners Club & Forum
Daves Compound Twin turbo XUD - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Daves Compound Twin turbo XUD (/showthread.php?tid=261)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12


Daves Compound Twin turbo XUD - Dave - 08-12-2011

So managed to secure my actual name so win there Wink Ha11 previously

I wont go into the history of my blue car, as I guess its irrelevant because I now have the black pig...

[Image: IMAG0958.jpg]

It was a bit of a state then....... and its still a state, but I tend to put my efforts into engine power...

[Image: IMAG1289.jpg]

Abit of fettling, and its annual wash and its looking a little better Smile

Swapped all my bits over from the blue car, basically bigger snail, beefy pump, and was running 45psi.

[Image: IMAG1207.jpg]

[Image: IMAG1239.jpg]

[Image: IMAG1392.jpg]

This didnt last too long like that..... as expected... but DHY, it had to go... in style...

[Image: IMAG1380.jpg]

Another DHY rod from the same block... clearly bent

[Image: IMAG1406.jpg]

So got another block in soon enough:

[Image: IMAG1383.jpg]

Then not much happened for ages... car was reliable on a D8A block, with silly revs and ~30psi boost. Did over 10k miles like that...

Then I pulled it apart... and did this...

[Image: IMAG2388.jpg]

[Image: IMAG2507.jpg]

[Image: IMAG2509.jpg]

Wink

[Image: IMAG2543.jpg]

[Image: IMAG2553.jpg]

[Image: IMAG2561.jpg]

[Image: IMAG2522.jpg]

[Image: IMAG2556.jpg]

[Image: IMAG2557.jpg]


Re: DERV project + pics - londondan86 - 08-12-2011

Really like this project, full of XUD style win!


Re: DERV project + pics - padge - 08-12-2011

alright dave, was thinking how long it would be untill you came on here, turbo looks huge on that lol.


Re: DERV project + pics - Danny2009 - 09-12-2011

Loving this them pistons look epic.


Re: DERV project + pics - Matt - 09-12-2011

Looks good nice. Nice pistons Smile


Re: DERV project + pics - Poodle - 09-12-2011

Dave Wrote:[Image: IMAG1207.jpg]

This photo still makes me laugh every time. Glad to see you made it over here.


Re: DERV project + pics - Matty - 09-12-2011

Dave Wrote:[Image: IMAG2556.jpg]

Big. O_O


Re: DERV project + pics - Harky - 09-12-2011

Love the welded rods..proper XUD style!


Re: DERV project + pics - mark_airey - 09-12-2011

Dave you never fail to impress me with problem soloutions, the rods are just inspired mate, and also +1 on the lols with the turbo pic!

still sounding like a train at idle when cold I take it?


Re: DERV project + pics - Dave - 10-12-2011

haha cheers mark, nah not sounding like that now, still running plenty of advance clatter which I looove, but the timing with completely out at fcs.. was advanced probably 10 degrees at FCS... its no where near that now...


Re: DERV project + pics - Dave - 25-12-2011

hm thought better update this, after the recent tragic fail of biblical proportions that engine got chucked, and the next engine is pretty much scrap aswell, which is pretty shite. Photos anywho.

fubar block coming out,
[Image: IMAG2713.jpg]

[Image: IMAG2711-1.jpg]

car looking very sorry,
[Image: IMAG2761.jpg]

old block.
[Image: IMAG2748.jpg]

turbo had to come apart to check for damage, was ok though.
[Image: IMAG2743.jpg]

[Image: IMAG2735.jpg]

my dad chopping up a scrap crank so, gonna be doing some weight tests and stuff on a piece of material.
[Image: IMAG2763-1.jpg]

Thought was about time I made a visit to the scrap yard aswell, still have half a trailer full of old gearboxes and puch maxi parts....
[Image: IMAG2764.jpg]

And to my disappointment, the worn out donor block, must have done some insane miles, tons of piston slap, and bores glazed to f*ck, which I cant be arsed to do anything with, not worth reworking internals or wasting a gasket/oil.
[Image: IMAG2751.jpg]

and the workspace.... Smile
[Image: IMAG2706.jpg]

Have dropped a totally stock block back in her now Sad so have to just watch boost until I can get hold of a good bottom end to play with again... I missed boost Smile going down to see Darren Ruan and James in next few days unfortunatly its not going to be running anywhere near what I wanted it to be Sad


Re: DERV project + pics - Scott - 28-12-2011

That's a shame mate. Hopefully the new block will be a bit more reliable for you when you start putting silly boost through it!


Re: DERV project + pics - darrenjlobb - 28-12-2011

Dave has arrived in cornwall, with 4 wheels still attached to the car (just) and 4 conrods still in the block (thank fook) Smile

9mm pump FTL tho!


Re: DERV project + pics - Dave - 29-12-2011

In te lobbsop at te moment on a totally fail laptop, guess wic keys dont work on tis.... need to swap rear drums...


Re: DERV project + pics - Dave - 28-01-2012

[Image: IMAG0334.jpg]

[Image: IMAG0335.jpg]

[Image: IMAG0346.jpg]

Im not the best welder,
should flow well though


Re: DERV project + pics - Foxy-jim - 28-01-2012

Looks like a nice project. What power you aiming for?


Re: DERV project + pics - Dan! - 28-01-2012

Fu..kin.....'ell...... Confusedhock:

Nice welding dave.......... :think:


Re: DERV project + pics - Dave - 28-01-2012

Dan you sarcastic bastard Wink


Re: DERV project + pics - mark_airey - 28-01-2012

lol at the welding, that looks like about my standard of welding does that mate, if its functional then who gives a shite what it looks like.............. Big Grin


Re: DERV project + pics - Dave - 28-01-2012

Its actually alot better than it looks, its penetrated very well to the right thickness its just there is so many gaps that needed filling I just sprayed it everywhere in the end :p I have the other side of the turbo to do now..... turbo to exhaust.... and gear linkages are all in the way, leaving about 1.8inches of room to squeeze enough flow for 6k in there :p


Re: DERV project + pics - devils_fuel - 28-01-2012

Hello ha11 Wink


Re: DERV project + pics - Dave - 28-01-2012

Hello.... Smile

[Image: IMAG0380.jpg]

Spent this evening making turbo flange plat up etc, the turbo sits so much lower then stock, and I want it to remain OEM fitting so I have to move the exhaust downpipe back up again... bit tight against the gearlinkage as said before but shouldn't cause any issues... if I do find any out comes the grinder... my face is f*cking sunburnt to shit now...


Re: DERV project + pics - 4WayDiablo - 29-01-2012

Looking good! :-)


Re: DERV project + pics - mark_airey - 29-01-2012

Dave Wrote:[Image: IMAG0380.jpg]
Now that's some nice tidy welding, good effort Dave


Re: DERV project + pics - silverzx - 30-01-2012

Looks like a T25 of a S13?


Re: DERV project + pics - Dave - 30-01-2012

That inferior technology is coming off... Wink


Re: DERV project + pics - mark_airey - 30-01-2012

silverzx Wrote:Looks like a T25 of a S13?
It was bigger than that to start with! lol

From your above comment Dave would I be correct in guessing VNT?


Re: DERV project + pics - Dave - 01-02-2012

Its got a T28 on it at the moment, as you guessed correctly at FCS Wink

VNT's are £££, control sucks and cruising is shit ... here is the biggest problem I have right now,
[Image: IMAG0360.jpg]
so in two minds to just cut all the linkages and shorten them, have made up a plate as you saw above, but its a little narrow inside.... EMP/EGT guage post turbo to see how it affects the backpressure I think.... The T28 still had alot more to give with anyway.


Re: DERV project + pics - darrenjlobb - 01-02-2012

The the top part of it right down around dave, on the linkages I mean...will work just the same and be out the way Smile Ive had to do that a few times to fit blowers in!


Re: DERV project + pics - Dave - 27-02-2012

In chesterfield at the weekend, exhaust fell off, and was on 90% derv... sounded good Big Grin
Video does no justice but still...

http://s585.photobucket.com/albums/ss29 ... EO0393.mp4