+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: CLUTCH CABLE HELP (/showthread.php?tid=25960)
CLUTCH CABLE HELP - Piggy - 15-08-2014
So to humour Mr Knowitall I did the push clutch down and release thing to aparantly fix my paddle clutch judder.
I did it maybe 3/4 times.
Result??
I now have a clutch that judders AND that slips as its bite is so high its holding the clutch a little bit.
Before I swap the cable for a second hand spare I have....any ideas? Any tricks to reversing the situation??
Need a non slippy clutch for tomorrows tuning session
RE: CLUTCH CABLE HELP - Paul Baldwin - 15-08-2014
Seems that's a tried and tested method. http://306oc.co.uk/forum/thread-4767.html
Maybe undo it, spray some lube down it and make sure it's properly seated and try it again?
RE: CLUTCH CABLE HELP - Piggy - 15-08-2014
Ive managed to strip down the adjuster and reset it enough for it to work again.
The stop bracket had also bent a little from the pedal springing up!
RE: CLUTCH CABLE HELP - Paul Baldwin - 15-08-2014
That shouldn't be too much trouble for a man of caliber
Are you absolutely sure you haven't got a dodgy mount anywhere that's amplifying any judder from the clutch you are having?
RE: CLUTCH CABLE HELP - Piggy - 15-08-2014
Quite possibly as Ive got more engine-car vibrations since doing the clutch and turbo
RE: CLUTCH CABLE HELP - toseland - 17-08-2014
aNy chance you broke a fork by pinging the clutch back off?
RE: CLUTCH CABLE HELP - Paul_13 - 17-08-2014
There must be a way of keeping the pull type clutch but using an adjustable cable (like the 205 gti)
These cables only seem to cause problems.
You could convert to a push type clutch and use the 205 cable.
Means getting a 1.9 mi16 clutch cover plate, you can keep your paddle clutch. Just got to change the fork in the box to a hdi/205
RE: CLUTCH CABLE HELP - Piggy - 17-08-2014
But the hdi type doesnt hold as much torque due to the design.
I agree though...my jap cars all had two 10mm nuts to adjust it exactly how you wanted!
RE: CLUTCH CABLE HELP - Paul_13 - 17-08-2014
The 1.9mi clutch should hold more than the hdi.
People run them on 205 gti6 conversions including myself.
With a paddle clutch it should hold more
RE: CLUTCH CABLE HELP - Piggy - 17-08-2014
If I do anything about it...it will be a hydro job