Polishing my tip.. - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6) +--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7) +--- Thread: Polishing my tip.. (/showthread.php?tid=25879) |
Polishing my tip.. - ginge191 - 12-08-2014 Can anyone recommend any products or methods to getting that squeaky clean and shiny exhaust tip. RE: Polishing my tip.. - Danny2009 - 12-08-2014 Autosol metal polish works well RE: Polishing my tip.. - cully - 12-08-2014 1500 grit wet n dry then autosol RE: Polishing my tip.. - Toms306 - 12-08-2014 As above, autosol....but don't get it confused with anusol... RE: Polishing my tip.. - RetroPug - 12-08-2014 http://306oc.co.uk/forum/thread-19890-post-418067.html#pid418067 Autosol and microfibre clothes. RE: Polishing my tip.. - silverzx - 12-08-2014 (12-08-2014, 09:06 AM)cully Wrote: 1500 grit wet n dry then autosol Sand paper cleans everything. RE: Polishing my tip.. - Jimbo - 12-08-2014 (12-08-2014, 10:07 AM)silverzx Wrote:(12-08-2014, 09:06 AM)cully Wrote: 1500 grit wet n dry then autosol EFA[/b] RE: Polishing my tip.. - toseland - 12-08-2014 (12-08-2014, 10:07 AM)silverzx Wrote:(12-08-2014, 09:06 AM)cully Wrote: 1500 grit wet n dry then autosol technically so does polish 1500grit is fine, unless they do 2000... either way, that, and a little autosol will do the trick RE: Polishing my tip.. - Curt - 12-08-2014 You can get 2000 and finer. It's easy with a polishing head on a Dremel, use it on my inlet. Re: Polishing my tip.. - kentiiboii - 12-08-2014 Degg bought a 2 step metal polish yesterday. Worked really well on my tip. RE: Polishing my tip.. - ginge191 - 15-08-2014 Does that stuff cut through surface rust? My tip cleaned up nicely with some 1600 and loob. Just that surface rust/crud Re: Polishing my tip.. - kentiiboii - 15-08-2014 Well deggs tip is covered in soot and that came out nice. Neither of the was rusty tbh. |