306oc - Peugeot 306 Owners Club & Forum
door handles never work first time! - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: door handles never work first time! (/showthread.php?tid=25815)



door handles never work first time! - rd070707 - 08-08-2014

Okay guys developed a problem that startef with having to pull the exterior door handle twice to get it to pop, but now you have to do it like 5 or 6 times and this is the passenger and drivers doors so really annoying lol

The doors open perfectly from inside though and it seems if i unlock the car manually with the key as opposed to remote it is slightly better.

Any ideas?


RE: door handles never work first time! - Eeyore - 08-08-2014

I am having this problem too. Sometimes the drivers door wont open and i have to open the rear door and open it from the inside. Not sure whats happening but even when it does open it takes quite a pull to break the seal.


RE: door handles never work first time! - Toms306 - 08-08-2014

Hmm, I'd guess the door has dropped over time and the handle cant pull far enough to fully disengage the latch, I'd try moving the latch on the B pillar down slightly tbh. Might not be that though!

Don't go at the handles too hard though, they break off easy! Then its rear door entry every time lol.


RE: door handles never work first time! - rd070707 - 09-08-2014

its really annoying! and as mine is 3 door its not as simple as going in the rear door. i was hoping it would be something simpler as when I unlock the car manually or if i have opened the door, closed it and then open it straight away again it will go first time


RE: door handles never work first time! - Toms306 - 09-08-2014

Moving the latch is the simplest fix ever lol, its 2 minutes with a screwdriver.

If it's working under those conditions though, maybe the unlock solenoid is failing, but I cant see it happening to both at the same time. If it is that, changing it is a right arse.

I suppose the only simpler fix would b to grease the lock mechanism, I had a door that kept bouncing instead of shutting and a bit of lube then working it a bit seemed to fix it.


RE: door handles never work first time! - mikes - 20-08-2014

I had this on mine, the door cards were a bit loose which caused the bits you pull up to unlock the car from the inside to foul against where they come through the door card. They were only 3-4mm away from the top when I unlocked it from the outside but still stopped the door from opening.