Rear brake protector shield for discs - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19) +--- Thread: Rear brake protector shield for discs (/showthread.php?tid=2566) |
Rear brake protector shield for discs - Welshy_Pete - 02-04-2012 Rear brake protector shield for discs has corroded away on one side. How does it come of with what nuts or hex keys etc? Re: Rear brake protector shield for discs - 4WayDiablo - 02-04-2012 take the wheel off and have a look? Re: Rear brake protector shield for discs - mark_airey - 02-04-2012 IIRC they are held on with 3 allen keys or torx bolts (I cant remember which though) Rear brake protector shield for discs - Matt - 02-04-2012 Torx, had to take mine off the other day Re: Rear brake protector shield for discs - samass - 02-04-2012 what matt said. did mine a while back, but rounded a couple off, so left them. use a SHITLOAD of penetrating fluid. Re: Rear brake protector shield for discs - Toby - 02-04-2012 samass Wrote:use a SHITLOAD of penetrating fluid. Giggity . Rear brake protector shield for discs - Matt - 02-04-2012 Mine came off nice an easy Re: Rear brake protector shield for discs - samass - 02-04-2012 Toby Wrote:samass Wrote:use a SHITLOAD of penetrating fluid. lolz Re: Rear brake protector shield for discs - Welshy_Pete - 02-04-2012 4WayDiablo Wrote:take the wheel off and have a look? I got both wheels of at the moment doing the back brakes. Re: Rear brake protector shield for discs - Welshy_Pete - 04-04-2012 The nuts are all warn out so Ive just cut the disc shield best I can removing it of. I might spot weld anther on in place if thats ok to do? Re: Rear brake protector shield for discs - Welshy_Pete - 06-04-2012 I got the 3 bolts out in the end I used mole grips to get them out. Then went to the scrap yard and got anther brake shield gaurd. So the job done now which Im glad and its now sorted out. The ones in the scrap yard come of easy to it saved alot of work on those. Then made it easy to fit them back on after. |