+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Rear beam Part no's (/showthread.php?tid=25605)
Rear beam Part no's - nick000 - 30-07-2014
After 3 weeks on and off, 2 cans of WD40, 1 hot air gun, a lump hammer, 2 screwdrivers, and countless expletives I have managed to strip down a '6 beam.
Would someome be able to help me with finding the following part numbers at all?
1 x TB threaded end cap
2 x Shouldered bolts that sit behind above cap and into the end of TB's
1 x Nylon Torx c/sink bolt
1 x Seal & bearing kit ( are the ebay kits @ £20 per side ok )
1 x TB end plate
2 x Handbrake cables
As you can tell - quite a b*****d to strip but tube and shafts look ok.
Thanks all Nick
RE: Rear beam Part no's - nick000 - 01-08-2014
(30-07-2014, 11:50 AM)nick000 Wrote: After 3 weeks on and off, 2 cans of WD40, 1 hot air gun, a lump hammer, 2 screwdrivers, and countless expletives I have managed to strip down a '6 beam.
Would someome be able to help me with finding the following part numbers at all?
1 x TB threaded end cap
2 x Shouldered bolts that sit behind above cap and into the end of TB's
1 x Nylon Torx c/sink bolt
1 x Seal & bearing kit ( are the ebay kits @ £20 per side ok )
1 x TB end plate
2 x Handbrake cables
As you can tell - quite a b*****d to strip but tube and shafts look ok.
Thanks all Nick
Can anyone help with where I can find part no's for tb end plate, & end caps?
thanks
RE: Rear beam Part no's - welshpug - 01-08-2014
servicebox, desler will be cheapest for most of that and ofte the sole source