Post your relocation manifold setups.

Post your relocation manifold setups. - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Post your relocation manifold setups. (/showthread.php?tid=25185)

Post your relocation manifold setups. - silverzx - 11-07-2014

Feel free to add pictures and a description of your relocation manifold.

Just need some rough idea on what pipe bends I'd have to order and some general ideas.

Here's Tom's old one to start us off:

[Image: untitled-9736A_zpsf5714794.jpg]

Dave the Destroyer:

[Image: IMAG1870_zpsaa0f205c.jpg]

Mikeys:

[Image: 09518984-4AED-4619-887A-BCD2B3B8EE40_zpsygqwiakw.jpg]

[Image: 9B4612F9-8CD7-4760-A394-1BD2129E7F52_zpsni0hb95z.jpg]

[Image: 1D0D4E61-CE7A-4B1A-B29E-F34B495400A8_zpswkwkjucm.jpg]

[Image: 0D1069F0-E869-40D7-A472-7E2EBC4E8402_zpsxelweiih.jpg]

Paddys:

Still need to add: Zacks, Darren, Daves.

RE: Post your relocation manifold setups. - toseland - 11-07-2014

if you had used any more weld on that little bracket, i think you couldpossibly have just bridged the gap haha..

looks good tho

RE: Post your relocation manifold setups. - silverzx - 11-07-2014

(11-07-2014, 09:09 AM)toseland Wrote: if you had used any more weld on that little bracket, i think you couldpossibly have just bridged the gap haha..

looks good tho

None of those are mine..? Blush

RE: Post your relocation manifold setups. - toseland - 11-07-2014

replace "you" with "the person who did this" Smile

still better welding than i could ever hope to acheive.

RE: Post your relocation manifold setups. - nominous - 11-07-2014

Does anyone make the flanges for the exhaust off the shelf?
I've seen them for the petrol but think they are different ??

Else, group buy? Smile

RE: Post your relocation manifold setups. - mikey b - 11-07-2014

I know Darren had a few made up for his projects a while back best of asking were he got them from

On my one few pics up I used original manifold but used a plasma cutter to cut the bugger out of the inside and make the hold 2.5 inch rather than the tiny hole they have lol so it flows pretty well

RE: Post your relocation manifold setups. - silverzx - 11-07-2014

(11-07-2014, 01:04 PM)mikey b Wrote: I know Darren had a few made up for his projects a while back best of asking were he got them from

Mikey did you order pipes or just use bits lying around?

RE: Post your relocation manifold setups. - pioneer DJ paddy - 11-07-2014

replace "you" with "the person who did this" Smile

still better welding than i could ever hope to acheive.

Ye think it me ur lookin for then lol :-) nt the best at the old welding lol heat wrap works wounders :-)

Wait just looked at that pic again that nt mine lol but the worlds worst welding medal has to go to me :-)

RE: Post your relocation manifold setups. - mikey b - 11-07-2014

(11-07-2014, 01:09 PM)silverzx Wrote:
(11-07-2014, 01:04 PM)mikey b Wrote: I know Darren had a few made up for his projects a while back best of asking were he got them from

Mikey did you order pipes or just use bits lying around?

Most bits for manifold I had I just had to buy the 3 inch bits for the down pipe on the turbo the other bits I had left over from a Nissan 300zx project

RE: Post your relocation manifold setups. - silverzx - 11-07-2014

Fair play.. I need loads of random bends.

Is yours 2.5"? 3"?

RE: Post your relocation manifold setups. - Piggy - 11-07-2014

Does a 2.1 count in?

...if so...help ya self to pics in my thread!

RE: Post your relocation manifold setups. - zx_volcane - 11-07-2014

I might have a spare XUD exhaust flange in Stainless

RE: Post your relocation manifold setups. - silverzx - 11-07-2014

(11-07-2014, 03:38 PM)zx_volcane Wrote: I might have a spare XUD exhaust flange in Stainless

Shot gun.

RE: Post your relocation manifold setups. - Tom - 11-07-2014

Paddys is the best.

RE: Post your relocation manifold setups. - clarkey2010 - 11-07-2014

Someone should start making these :p

RE: Post your relocation manifold setups. - Dum-Dum - 11-07-2014

(11-07-2014, 03:35 PM)Piggy Wrote: Does a 2.1 count in?

Likewise if the 2.1 counts I'll sort some pictures out when I finish mine (probably in the next few weeks)

Post your relocation manifold setups. - silverzx - 11-07-2014

Sure why not. It's all good stuff.