+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Fitting 406 215/50/16 alloys. (/showthread.php?tid=2507)
Fitting 406 215/50/16 alloys. - Toby - 29-03-2012
Evening all..
Quick question really.. Has anyone tried fitting the 406 coupe 16" alloys with the 215 profile tyres?
My old 306 ran 205/17's without excessive scrubbing on the arch, but I think the 406's ran a slightly different offset?
The one's I'm talking about are the 6 spoke ones from the 3 litre V6.
Any advice appreciated.. I know they will probably fit on the front.. Could I roll the rear arches if need be?
Cheers.
Re: Fitting 406 215/50/16 alloys. - Connor - 29-03-2012
215/50 would be too big a profile I reckon, might not rub but would look shit imo plus I dont think the starfish alloys suit the 306 at all
Re: Fitting 406 215/50/16 alloys. - Dum-Dum - 29-03-2012
yeah theyer a lower offset so stick out more and the baloon tyres would be huge and look shite.
Re: Fitting 406 215/50/16 alloys. - Toby - 29-03-2012
That's fine, just thought I'd double check
Cheers guys.
Re: Fitting 406 215/50/16 alloys. - Dum-Dum - 29-03-2012
will look lush with 194/45R16 or 205/45R16 with rolled arches
Fitting 406 215/50/16 alloys. - kentiiboii - 29-03-2012
If its the ones I'm think then IMO they don't look nice full stop never mind on a 306. But your choice. Get lower profile tyres and give them a go. Get a photoshop done first.
Re: Fitting 406 215/50/16 alloys. - kingy - 29-03-2012
tryed this on mine and they dont fit and they look shit.
Re: Fitting 406 215/50/16 alloys. - Scott - 29-03-2012
They're ET13 compared to the ET15-18 of a 306.
Re: Fitting 406 215/50/16 alloys. - Toby - 29-03-2012
Scott Wrote:They're ET13 compared to the ET15-18 of a 306.
Cheers Scott
Btw, you never replied to my PM, do you still have that large 306oc white sticker?
