+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Spacers and spigot rings (/showthread.php?tid=24934)
Spacers and spigot rings - Welshy_Pete - 29-06-2014
I have a hubcentric spacer which is 73mm going to the hub wheel. But it needs a spigot at 76mm to fit properly to the wheel.
So how do I go about getting the right one 74mm spigot to fit on hubcentric 73mm then spigot to 76mm?
Thanks
RE: Spacers and spigot rings - Poodle - 08-07-2014
Spigot rings will do that, yes. I'm not sure where you've got the 74mm biy from, but from what I could understand of your post you need 73mm to 76mm spigot rings.
Spacers and spigot rings - Sambarker - 08-07-2014
How many do you need I'll have a look in my shed as I've got 6 spacers with a 70 something millimetre centre bore I might have some that are 76mm