Boost gauge T-piece - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Boost gauge T-piece (/showthread.php?tid=24641)

Boost gauge T-piece - clarkey2010 - 15-06-2014 what size T-piece is needed to fit a boost gauge? 6mm maybe? where to source one? RE: Boost gauge T-piece - Frosty - 15-06-2014 Yeah pretty sure its 6mm. Best to have a look on ebay RE: Boost gauge T-piece - ginge191 - 15-06-2014 Halfrauds sell em. Or, IIRC, the T piece from washer jet pipes fits. Grab one next time you're in the scrappy, maybe worth a check? RE: Boost gauge T-piece - silverzx - 19-06-2014 ebay they're 99p... 8mm for 99p: http://www.ebay.co.uk/itm/Tpiece-straight-elbow-joints-nipple-drinker-waterers-/190562630787?pt=UK_Pet_Supplies_Poultry&var=&hash=item2c5e6afc83 4mm for £1.27: http://www.ebay.co.uk/itm/4MM-T-PIECE-HOSE-5-32-JOINER-FUEL-BARBED-TEE-CONNECTOR-INLINE-FUEL-PIPE-PJ24-/360583608313?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item53f47537f9 RE: Boost gauge T-piece - clarkey2010 - 21-06-2014 had this one in the end as i missed the other links *woopsy* http://www.ebay.co.uk/itm/190885965346?_trksid=p2059210.m2749.l2649&var=490175920706&ssPageName=STRK%3AMEBIDX%3AIT 8mm--4mm--8mm fitted a treat! RE: Boost gauge T-piece - toseland - 21-06-2014 6-4-6 would be best, you should ideally be using 4mm id for the gauge hose anyhow RE: Boost gauge T-piece - Slam Wagon - 19-07-2014 Is using a t piece the easiest way on an xud or is there somewhere to drill and tap? RE: Boost gauge T-piece - daveylennon93 - 19-07-2014 T piece has to be the easiest way. Takes 2 minutes to join t piece and run hose into car. RE: Boost gauge T-piece - Slam Wagon - 19-07-2014 Where to t into on these, i know on the hdi t-ing is a pig, but going to help fit a boost gauge on one of these soon. RE: Boost gauge T-piece - toseland - 19-07-2014 you ahve the intercooler, then the best way is to T into the line that runs from the intercooler to the boost compensator on the pump./ that is most common anyhow RE: Boost gauge T-piece - Slam Wagon - 20-07-2014 Cheers guys. Should be able to figure it out. RE: Boost gauge T-piece - Dum-Dum - 20-07-2014 It depends what size hose your gauge takes really. RE: Boost gauge T-piece - clarkey2010 - 22-07-2014 the one which arrived for me. RE: Boost gauge T-piece - ADV_93 - 29-07-2014 Make sure you get a T-piece with anti-flutter in it. Nothing more annoying than a boost gauge that shakes more than harlem