+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: 307 6 speed gearbox (/showthread.php?tid=24575)
307 6 speed gearbox - Daniel306 - 11-06-2014
Where is the level plug? Haynes had got a diagram but it makes no sense to me,
what oil dose it take? 75w90?
RE: 307 6 speed gearbox - Toms306 - 11-06-2014
Thought they all took the same 75/80 oil and 2 litres of it? That's what the guy at Pug told me back before I knew what I needed lol.
RE: 307 6 speed gearbox - Daniel306 - 11-06-2014
There is two types of this box listed, one takes 1.6 and the other is like 2.3 i think, there is some difference in the cooling fins on the case,
i was planning to keep filling it via the reverse sensor untill the level plug but i cant find it
RE: 307 6 speed gearbox - Eeyore - 11-06-2014
Can you fit the 307 6 speed gear box to the 306 hdi?
RE: 307 6 speed gearbox - Toms306 - 11-06-2014
(11-06-2014, 10:10 PM)Daniel306 Wrote: There is two types of this box listed, one takes 1.6 and the other is like 2.3 i think, there is some difference in the cooling fins on the case,
i was planning to keep filling it via the reverse sensor untill the level plug but i cant find it
Oh OK, my bad then!
Level plug will most likely be on the end nearest the wheel, and just have a slightly bigger bolt head than the others in the same area. That's how it is on the 306 HDi box.
(11-06-2014, 10:10 PM)SRowell Wrote: Can you fit the 307 6 speed gear box to the 306 hdi?
Not easily, theres a thread on this from a couple of days ago.
RE: 307 6 speed gearbox - Daniel306 - 11-06-2014
Thats what i thought but its just a steel end cap on it, book says its in by the drive shalft but thats where i got lost
RE: 307 6 speed gearbox - Toms306 - 11-06-2014
Hmm, have you tried a 307 Forum? It's obviously very different to the 306 equivalent lol.
Though it looks like there is no level plug on the ML6 'box from a quick search, just fill to the correct amount depending on whether you have fins or flanges lol.