+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Cars (https://www.306oc.co.uk/forum/forumdisplay.php?fid=21)
+--- Thread: FOR SALE: Gauging interest! PH3 XUD Break or sell!! (/showthread.php?tid=24542)
Gauging interest! PH3 XUD Break or sell!! - Jimbo - 09-06-2014
Right, so its time to sell the moonstone 306 ive had for around a Year now due to buying another ph1
I currently unsure whether to sell whole or break for parts. Tax and mot are out end of the month so if i was to sell I'd sort a ticket out and stick 6 months on it.
The spec is,
2000 (w) moonstone hdi dturbo shell covered 190k ish
Full xud conversion 100k on engine and box.
Stripped lump, every gasket/seal replaced with victor reinz parts including head gasket/bolts
New valeo clutch
New cambelt
Garrett gt1752 saab turbo on modified manifold
9mm modded bosch setup
Ford tdci intercooler front mounted with hard alloy 2' pipes
63mm custom intake piping
Manual boost controller
Toyosports breather tank
2.5 inch mild steel exhaust system to scorpion rear box
Estimated 160/170 bhp (really does pull well)
Half leather interior
3 gauges in din slot
Relocated head unit
Leather wheel
ph2 DT clocks with moonstone insert
Saxo vts wheels bmw graphite grey new 195 45 15 tyres
Gti6 Brakes new discs pads
Refurbed beam new discs pads and handbrake cables
Ta tecknix coilovers new top mounts and Rear shocks
Black masks
Dturbo spec bodywork
Tinted lights on rear
Rev counter not working
Bodywork average, does clean up well though
Rear.arches chipped paint from rolling
Rear.beam mount knocking (annoying as checked and.felt ok when fitted beam)
Drivers door not the best paint wise
So id be after 750/800 as is with the tax and mot done
Other option is to break up for parts.
Not sure which route to take yet
Few pics
![[Image: DSC_0289.jpg]](http://s679.photobucket.com/user/jim-bob1991/media/DSC_0289.jpg.html)
![[Image: DSC_0307.jpg]](http://s679.photobucket.com/user/jim-bob1991/media/DSC_0307.jpg.html)
![[Image: PicsArt_1399185016646_1.jpg]](http://s679.photobucket.com/user/jim-bob1991/media/PicsArt_1399185016646_1.jpg.html)
Another pic from fcs
RE: Gauging interest! PH3 XUD Break or sell!! - Piggy - 09-06-2014
break it and sell the bumpers and bonnet and rear nearside door to me!
would be a shame to break it to be honest
RE: Gauging interest! PH3 XUD Break or sell!! - Mattcheese31 - 09-06-2014
looks real nice mate, although i did like the phase 1, someone should buy it surely? . .
RE: Gauging interest! PH3 XUD Break or sell!! - Jimbo - 09-06-2014
Hoping its gonna sell tbh, be a shame to break but need cash to start on the ph1
RE: Gauging interest! PH3 XUD Break or sell!! - Connor - 09-06-2014
Give all your body panels to me
RE: Gauging interest! PH3 XUD Break or sell!! - Mattcheese31 - 09-06-2014
is it not worth getting a cam belt snapped phase 1 or similar for peanuts and swapping all your bits over? . .
RE: Gauging interest! PH3 XUD Break or sell!! - bigcheez2k3 - 09-06-2014
He's already got the PH1, Matt.
It would be a shame to break it, seemed quite decent when I was looking at it. I'd be interested in the FMIC and associated parts if you do go down that route.
RE: Gauging interest! PH3 XUD Break or sell!! - Jimbo - 09-06-2014
Ok mate, ill keep that in mind
RE: Gauging interest! PH3 XUD Break or sell!! - ginge191 - 09-06-2014
Pm me for a sale please
RE: Gauging interest! PH3 XUD Break or sell!! - silverzx - 09-06-2014
If I didn't already have a XUD I'd be interested.
Don't think you'll have much trouble selling tbh.
RE: Gauging interest! PH3 XUD Break or sell!! - Jimbo - 09-06-2014
Pm'd
And cheers trent, hopefully someone snaps it up, its a good little machine
RE: Gauging interest! PH3 XUD Break or sell!! - silverzx - 10-06-2014
How's it feel over B/A roads? Does it feel ok over bumps and uneven road?
Most of the roads I commute along are sh!t..
RE: Gauging interest! PH3 XUD Break or sell!! - Jimbo - 10-06-2014
Ive learned to live with how TA coilovers ride, it sounds harsh over really uneven roads due to one of the beam mounts, they always sound worse than they are though
Re: Gauging interest! PH3 XUD Break or sell!! - kentiiboii - 10-06-2014
It's a shame this would be perfect for me in september time when I come to buy another car.
RE: Gauging interest! PH3 XUD Break or sell!! - Eeyore - 10-06-2014
Yeh dont break this man. Looks awesome and a lot of work has gone into it.
RE: Gauging interest! PH3 XUD Break or sell!! - laurence_13 - 13-06-2014
If it passes the MOT and stuff I may be interested in this if it hasnt gone yet
RE: Gauging interest! PH3 XUD Break or sell!! - Jimbo - 13-06-2014
Sorry to everyone who enquired this WILL be broken for parts now. Due to me wanting to keep some bits for my ph1. Will get a list up soon with prices etc
RE: Gauging interest! PH3 XUD Break or sell!! - ginge191 - 14-06-2014
What parts exactly are you keeping; anything essential to the running of the car?
RE: Gauging interest! PH3 XUD Break or sell!! - Piggy - 14-06-2014
you have PM!
RE: Gauging interest! PH3 XUD Break or sell!! - Jimbo - 14-06-2014
(14-06-2014, 07:01 AM)ginge191 Wrote: What parts exactly are you keeping; anything essential to the running of the car?
Yeah kinda, the bosch setup.
The coilovers
The fmic
Maybe the beam
RE: Gauging interest! PH3 XUD Break or sell!! - ginge191 - 14-06-2014
Hmm with the price I was offering you could buy new parts for the new car
as well as keeping yourself more money that you'd get for breaking! Dayum..
RE: Gauging interest! PH3 XUD Break or sell!! - Jimbo - 14-06-2014
I'm not looking for advice, but thanks for the concern
Hassle looking for another bosch setup that's a known good pump, also finding/building another refurbed beam,
Coilovers maybe sold anyway if i can find some 60mm springs