+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Wanted: Heater Matrix Pipes - Posted/Collected from FCS (/showthread.php?tid=24353)
Heater Matrix Pipes - Posted/Collected from FCS - silverzx - 30-05-2014
I have a early phase 1 heater matrix pipe setup that runs the pipes towards the gearbox, then back toward the block.
Does anyone have the shorter route version also found on late ph1's?
Can collect from FCS or pay postage.
Many thanks!
RE: Heater Matrix Pipes - Posted/Collected from FCS - silverzx - 02-06-2014
BUMP.
RE: Heater Matrix Pipes - Posted/Collected from FCS - Jaymes306 - 03-06-2014
Got some here! pm welcome
RE: Heater Matrix Pipes - Posted/Collected from FCS - zx_volcane - 03-06-2014
What is the issue? Can you not cut them and use pipe joiners + some pipe to get them where you need to get them?
RE: Heater Matrix Pipes - Posted/Collected from FCS - silverzx - 04-06-2014
(03-06-2014, 06:29 PM)zx_volcane Wrote: What is the issue? Can you not cut them and use pipe joiners + some pipe to get them where you need to get them?
Probably, but the OEM item would do the job just fine and probably cheaper.
RE: Heater Matrix Pipes - Posted/Collected from FCS - zx_volcane - 04-06-2014
iirc they come out at completely different angles though - poss to clear different sized / positioned servos
RE: Heater Matrix Pipes - Posted/Collected from FCS - silverzx - 04-06-2014
(04-06-2014, 09:40 AM)zx_volcane Wrote: iirc they come out at completely different angles though - poss to clear different sized / positioned servos
Link me to something appropriate then?
RE: Heater Matrix Pipes - Posted/Collected from FCS - zx_volcane - 04-06-2014
I'm unsure of your issue regarding the original ones, I've cut mine to reroute and clear my manifold with water pipe - pipe was only a few pound a metre from local motorfactors.
RE: Heater Matrix Pipes - Posted/Collected from FCS - silverzx - 04-06-2014
(04-06-2014, 09:43 AM)zx_volcane Wrote: I'm unsure of your issue regarding the original ones, I've cut mine to reroute and clear my manifold with water pipe - pipe was only a few pound a metre from local motorfactors.
You haven't seen them!
RE: Heater Matrix Pipes - Posted/Collected from FCS - silverzx - 05-06-2014
BUMP.
RE: Heater Matrix Pipes - Posted/Collected from FCS - silverzx - 06-06-2014
BUMP.