+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Fitting turbo (/showthread.php?tid=24159)
Fitting turbo - pbell283 - 21-05-2014
Ok so i fitted my turbo now it sounds bit like a police siroen with no boost but the reek is pure black not a bit of white could it be a boost leak ?
RE: Fitting turbo - toseland - 21-05-2014
sounds like it.. all gaskets new on the inlet/pipes? it would have to be a pretty hefty boost leak break out the soapy water and give all the pipe joints a spray, rev the engine gently, if yous ee bubbles you have a leak..
i would suspect that something is open completely or left off somewhere however
Fitting turbo - pbell283 - 21-05-2014
Didnt change any gaskets
RE: Fitting turbo - Danny2009 - 21-05-2014
Lol
Have you got a boost gauge to see what it's boosting?
Is there any play in turbo?
Let's hope inlet/exhaust gasket isn't leaking or you will have to take turbo off again
Fitting turbo - pbell283 - 21-05-2014
No play in turbo and hope not like and boosting 0 psi
RE: Fitting turbo - Danny2009 - 21-05-2014
If there is 0 psi something's not right even a blowing gasket still should register some boost made sure the boost gauge pipe is on properly or if it's split
Fitting turbo - pbell283 - 21-05-2014
Tryed everything think needs another turbo
RE: Fitting turbo - Seb_Ryan - 21-05-2014
Have you connected the pipes properly? Lol
Fitting turbo - pbell283 - 21-05-2014
Yea u have
Fitting turbo - pbell283 - 21-05-2014
Ok the turbo im gettingg is a k14 has manafold and all the pipes still
hopefully goes straight on