![]() |
Wanted: XU7JP4 1.8 16v bottom end - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Wanted: XU7JP4 1.8 16v bottom end (/showthread.php?tid=24073) |
XU7JP4 1.8 16v bottom end - powerandtorque - 16-05-2014 Anyone got a XU7JP4 1.8 16v bottom end surplus to requirements that they want rid of cheaply? Don't need the head, manifolds, loom etc. I only really need the block and associated parts and don't really need the crank/pistons/rods as I'll be replacing those, so it isn't an major issue if it has a knocking bottom end, low oil pressure, poor compression or similar providing that the block itself is in VGC. Within an hour or so of Swindon, Wiltshire if possible, or could possibly collect from Ace Cafe on Monday. Annoyed because I gave away a perfect 50k mile one a couple of years back! ![]() RE: XU7JP4 1.8 16v bottom end - Midnightclub - 16-05-2014 Think floz has one/had one... may be worth PM'ing him? There was a thread EDIT: found it http://306oc.co.uk/forum/thread-18094.html RE: XU7JP4 1.8 16v bottom end - powerandtorque - 16-05-2014 Good call, thanks - I've dropped him a PM ![]() RE: XU7JP4 1.8 16v bottom end - Midnightclub - 16-05-2014 No worries ![]() RE: XU7JP4 1.8 16v bottom end - powerandtorque - 16-05-2014 Heard back from him and it's no longer available, so still looking. RE: XU7JP4 1.8 16v bottom end - welshpug - 16-05-2014 building a 1.9 Ant? RE: XU7JP4 1.8 16v bottom end - powerandtorque - 16-05-2014 Indeed. This lump of pig iron over the front axle is upsetting me... RE: XU7JP4 1.8 16v bottom end - welshpug - 16-05-2014 A good 20 kilos there! RE: XU7JP4 1.8 16v bottom end - Paul_13 - 17-05-2014 ![]() Might have the cam off you if it's for sale. I can cope with timing one up just not two RE: XU7JP4 1.8 16v bottom end - welshpug - 17-05-2014 can time lumpy sticks to your hearts content over MI pistons, infact the pistons will take more than the valve springs and spray bars can ![]() RE: XU7JP4 1.8 16v bottom end - Jaymes306 - 26-05-2014 Got a whole engine here, yours for £100 |