+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Big oil leak (/showthread.php?tid=23449)
Big oil leak - MarkTD - 21-04-2014
So put exhaust and finished off fitting FMIC today and thought it was going great!
Looked at the side of the car and its pissing oil like mad when I rev it! My thoughts are it could be the oil feed line to turbo and it might of cracked but no sure at the moment. As I had to clean up lots of oil!!!!
If it is the oil feed, where is the best place to get one from? I tried the code on service box for the part but I can't find it at the moment. Gonna keep searching for it.
RE: Big oil leak - DarkInferno - 21-04-2014
(21-04-2014, 05:20 PM)MarkTD Wrote: So put exhaust and finished off fitting FMIC today and thought it was going great!
Looked at the side of the car and its pissing oil like mad when I rev it! My thoughts are it could be the oil feed line to turbo and it might of cracked but no sure at the moment. As I had to clean up lots of oil!!!!
If it is the oil feed, where is the best place to get one from? I tried the code on service box for the part but I can't find it at the moment. Gonna keep searching for it.
I'm guessing a hydraulics shop would be the best place for a new pipe
RE: Big oil leak - willJspears - 21-04-2014
its either a crack in the oil feed line, or the rubber seal in the union nut has worn and isnt holding a seal hence oil pissing out. happened to me when i changed my turbo. so first i would check the little o ring seal first before buying a new feed line. if not then you can get a flexi hose made up for around £30 i think,
thats if it is the oil feed, get under the car and clean up the oil and try and figure out where its actually coming from first.
Big oil leak - MarkTD - 26-04-2014
Turns out the return line had come off. It's fixed now
