boost guage - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10) +--- Thread: boost guage (/showthread.php?tid=23244) |
boost guage - Scouse282 - 14-04-2014 Is there any other way of plumbing in the boost guage that isnt drilling and tapping the manifold ? RE: boost guage - titch - 14-04-2014 (14-04-2014, 10:12 PM)Scouse282 Wrote: Is there any other way of plumbing in the boost guage that isnt drilling and tapping the manifold ? http://306oc.co.uk/forum/thread-22638.html RE: boost guage - MIKE-FORD - 15-04-2014 I asked the same question as thought a thread would of been made a sticky then searching but seems the easy way is drilling as the other way is a pain unless have time and able to bring the engine forward or out of the bay to get to the bit you need RE: boost guage - Scouse282 - 15-04-2014 (15-04-2014, 07:38 AM)MIKE-FORD Wrote: I asked the same question as thought a thread would of been made a sticky then searching but seems the easy way is drilling as the other way is a pain unless have time and able to bring the engine forward or out of the bay to get to the bit you need Aye drilling looks the easiest option will just have to bite the bullet RE: boost guage - Slam Wagon - 15-04-2014 Its really simple to drill and tap. The metal is so soft. RE: boost guage - MIKE-FORD - 15-04-2014 Take the inlet off though when drilling RE: boost guage - tuttyboy84 - 20-04-2014 Is there a certain one to get or are all boost gauges much for much??? RE: boost guage - Slam Wagon - 20-04-2014 I wouldnt buy a cheap ebay one. Spend a little more and get something branded. No point in anything too fancy though. |