306oc - Peugeot 306 Owners Club & Forum
FOR SALE: 1.4 + 1.6 4 branch manifold decat and exhaust - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: FOR SALE: 1.4 + 1.6 4 branch manifold decat and exhaust (/showthread.php?tid=22854)



1.4 + 1.6 4 branch manifold decat and exhaust - 306Dan - 03-04-2014

Stainless steel 4 branch saxo/106 manifold modified by powerflow exhausts ( Mr Tyre) lincoln to fit a 306.
This will fit on a standard system so you only have to change to a standard cat for mot not swap the entire system.
I can include a lambda sensor in with the sale if needed but i cant guarantee its a perfect sensor.
For some reason i always found it easier doubling the manifold gaskets when fitting, i think it increased the clearance to one bolt.

Stainless De-cat and stainless exhaust wolfrace exhaust, centre pipe and back box are one piece and iirc it was custom made for a friends 306.
It's a 2" system with a 3.5" slash cut tip on the back box

All new clamps included in the sale
Everything could do with a good clean and polish but theres not cracks in the manifold.

Any questions please feel free to ask.

looking for £100 ono

collection from dn21

im always willing to wrap everything up if you wish for a courier to collect, i can try organise a courier but as im away alot it becomes a bit fun

[attachment=14955]

[attachment=14957]

[attachment=14958]

[attachment=14959]

[attachment=14960]


RE: 1.4 + 1.6 4 branch manifold decat and exhaust - 306Dan - 04-04-2014

Flange measurements as requested by Darren please excuse my paint skill's

[attachment=15003]


RE: 1.4 + 1.6 4 branch manifold decat and exhaust - 306Dan - 08-04-2014

Anyone?? As said open to offers


RE: 1.4 + 1.6 4 branch manifold decat and exhaust - 306Dan - 14-04-2014

up to the top


RE: 1.4 + 1.6 4 branch manifold decat and exhaust - 306Dan - 20-04-2014

bank holiday bump for all you tu lovers


RE: 1.4 + 1.6 4 branch manifold decat and exhaust - darrenjlobb - 20-04-2014

If you get desperate I would take the short section on the end of the four branch...but don't really need the rest / justify it all....