adaptor plate fitting - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: adaptor plate fitting (/showthread.php?tid=22080)

adaptor plate fitting - clarkey2010 - 10-03-2014 right am i missing something here, cant seem to be able bolt anything down. or is the plate just miles out? RE: adaptor plate fitting - Chris_90 - 10-03-2014 Turn the plate over or around something like that sure I did same as you, but I did have to elongate the holes on manifold slightly because they was still off RE: adaptor plate fitting - 306Dan - 10-03-2014 Looks like the plate need flipping over as Chris has put RE: adaptor plate fitting - anto - 11-03-2014 Flip it over. However because your manifold is an egr one it may hit your adaptor plate. I made my own adaptor plate (for TD04) and had to cut the egr portion of my manifold off and weld it up in order for the plates to fit.