+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Identify this Inlet Mani ! (/showthread.php?tid=21937)
Identify this Inlet Mani ! - andyyy - 06-03-2014
When i bought the 205 it came with a boot full of parts - most of them useless crap like a dead lucas pump and another one in bits also strangely a load of timing cogs and a dead water pump
When I looked through them i found this inlet manifold and just wondering what its off and wether it'll go on my 1.9td so i could run a F.M.I.C ?
Id have to make up a plate to run one on my standard manifold as its square when it goes to the intercooler is this a good way round that or should i just get on and make a plate?
![[Image: 5Bi9U.jpg]](http://www.anony.ws/i/2014/03/06/5Bi9U.jpg)
![[Image: t0WNY.jpg]](http://www.anony.ws/i/2014/03/06/t0WNY.jpg)
RE: Identify this Inlet Mani ! - darrenjlobb - 06-03-2014
Non intercooled late xud7 early xud9 mani, Connets direct to turbo, and vac puump bolts onto it on the right.
RE: Identify this Inlet Mani ! - andyyy - 06-03-2014
(06-03-2014, 09:08 AM)darrenjlobb Wrote: Non intercooled late xud7 early xud9 mani, Connets direct to turbo, and vac puump bolts onto it on the right.
Ever tried connecting a Intercooler ta one?
RE: Identify this Inlet Mani ! - anto - 06-03-2014
Looks like it would be a pain in the arse finding a way of getting pipes to it Andy. Not impossible, but not worth it in my eyes.
RE: Identify this Inlet Mani ! - aggyj17 - 06-03-2014
Yea this Is a xud9 one and the turbo comes straight into there so if you was to use it attach a intercooler to it you would need to clock the turbo
RE: Identify this Inlet Mani ! - andyyy - 06-03-2014
Alright cheerrs guys ill scrap that inlet then, found some measurements on here to make a plate up just need to source some steel ... off to cut something upp......
Identify this Inlet Mani ! - td_dan - 06-03-2014
I could just sell you my spare that bolts on to the standard manifold, £30 posted
RE: Identify this Inlet Mani ! - andyyy - 06-03-2014
Im alright thanks ill make one up bit strapped for cash atm
Identify this Inlet Mani ! - td_dan - 06-03-2014
No worries
RE: Identify this Inlet Mani ! - randomcaller - 06-03-2014
Just read this, I'm crying out for an inlet adapter! Finished my 205 xud conversion now and that's one of the final touches I need. I can't buy one or pm though because I've not met the post count and don't want to spam my way up to 30 posts! Will there be another run of adapters being made up in the future?
Identify this Inlet Mani ! - td_dan - 06-03-2014
I have one but obviously you need more posts lol unless you have fakebook i can message you through there
RE: Identify this Inlet Mani ! - randomcaller - 06-03-2014
I do have Facebook, my name is Chris hall (my picture is me in a wheelchair) is that still within the rules though?
RE: Identify this Inlet Mani ! - Dave - 07-03-2014
would be ideal for someone wanting to steal tune a stock NA
