Wanted | Heater Matrix hoses - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Wanted | Heater Matrix hoses (/showthread.php?tid=21718) |
Wanted | Heater Matrix hoses - zx_volcane - 26-02-2014 After a set of heater matrix hoses that go into the bulkhead From an 02 plate hdi They look different to any I have lying around, the pipes come out at an angle to clear the brake servo, and also it doesn't have a long pipe for bleeding, it just bleeds at the union itself. RE: Wanted | Heater Matrix hoses - Dangti6 - 26-02-2014 Do you have a pic of yours? RE: Wanted | Heater Matrix hoses - mikey b - 26-02-2014 How desperate are you for them we are fitting jimbos xud on the 8th and swapping the ones from that to the xud ones Wanted | Heater Matrix hoses - zx_volcane - 26-02-2014 I might be able to get a pic of bits of it, could do with it asap as usual RE: Wanted | Heater Matrix hoses - zx_volcane - 27-02-2014 The plastic bit that goes into the bulkhead does look like this one How the pipes then go doesn't really matter too much as can make something up RE: Wanted | Heater Matrix hoses - Dangti6 - 27-02-2014 I'll get a photo of a set I have this evening. The angle is the same from memory - but has the bleed point on a length of hose. May be compatible. Wanted | Heater Matrix hoses - zx_volcane - 27-02-2014 Sweet cheers! RE: Wanted | Heater Matrix hoses - HDIkyle - 27-02-2014 My hdi ones where like that. So should be easy to get RE: Wanted | Heater Matrix hoses - zx_volcane - 01-03-2014 bump - anyone got a set they can post out or collection near Birmingham? RE: Wanted | Heater Matrix hoses - Dangti6 - 02-03-2014 Pic of the one I have: RE: Wanted | Heater Matrix hoses - Slam Wagon - 02-03-2014 Ive got one here. think its missing the bleed cap though, might have a spare i can pop on but ill need to have a hunt for it. RE: Wanted | Heater Matrix hoses - zx_volcane - 02-03-2014 Despite being a later shell, its having an xud transplant The two pipes - one goes to the back of the block, the other to the back of the head - so as long as they're long enough to reach that far it'll be fine. (02-03-2014, 10:23 AM)Dangti6 Wrote: Pic of the one I have: Those will probably be fine - held in by one metal clip through the centre of the hoses? rather than the older style which had a plate that screw over + a metal clip round the outside? (02-03-2014, 10:37 AM)PE02KHG Wrote: Ive got one here. think its missing the bleed cap though, might have a spare i can pop on but ill need to have a hunt for it. I can find a bleed cap no worries RE: Wanted | Heater Matrix hoses - Slam Wagon - 02-03-2014 £5 plus postage? I'll try and get it sent tomorrow. Just pop me a pm if you want it |