![]() |
Show: FCS 2014 - Front Row Submissions - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6) +--- Forum: Meets (https://www.306oc.co.uk/forum/forumdisplay.php?fid=8) +--- Thread: Show: FCS 2014 - Front Row Submissions (/showthread.php?tid=21368) |
FCS 2014 - Front Row Submissions - Scott - 14-02-2014 Main thread: http://306oc.co.uk/forum/thread-21366.html
Want to get your car on the front row of the stand for French Car Show 2014? We will be selecting approximately 8 cars for the front row, so there's a good chance your car will be chosen! It does not have to be a 306 specifically, but can actually be a 306-derived model or something with a 306 engine (e.g. Citroen ZX, 205 GTi-6, etc.) Please follow the following template (copy and paste into the new reply box). PHP Code: [u][b]Username:[/b][/u] How it will display: Username: First Name: Model: e.g. DT, GTi-6, HDi Modifications: list your modifications here, such as lowering, alloy wheels, window tints, bigger turbo Photos: *3 photos maximum. Any more and your submission will be ignored* RE: FCS 2014 - Front Row Submissions - cully - 14-02-2014 Please keep this thread for entrys only any other coments will be deleted closing date for entries will be Around 3 weeks before the show date Please make your entrys before this date ![]() current entrys kentiiboii Model: meridian hdi sian (sian) Model: gti 6 cully Model: Ph2 GTi6 PIGGY Model: 2.1GTd craigus Model: ph1 dturbo jimmyboycheck Model: black rallye Grant Model: 306 XSI Niall Model: Supercharged GTi6 sian (Adam) Model: gti 6 Dum-Dum Model: 2002 Meridian SE HDi Estate SRowell Model: 306 1.8 16V zx_volcane Model: Citroen ZX Danny2009 Model: 309 d turbo PE02KHG Model: Hdi Estate 7057sam Model:gti6 ash23 Model:dturbo Estate ozonehostile Model: oem+ gti6 Re: FCS 2014 - Front Row Submissions - kentiiboii - 14-02-2014 Removed the hdi from submissions but ill leave this space for the gti6. Username: kentiiboii First Name:kent Model: gti6 Modifications: 17" 307 aidel alloys powder coated in graphite grey. 15mm spacers Strut brace powdercoated in graphite grey. Scorpion back box. K&N panel filter. Rich W alloy crank pulley. Mist jets. Aero flat wipers. Still to be fitted/arrive: Baker bm engine mounts. Solid rear beam mounts. OMP Corcisa steering wheel. GTI6 deep spoiler. Plans before French car show: Paint front and rear badges. Paint Peugeot lions in wheel centers. Paint center console. New front bumpers, possibly paint one. Crystal headlights, Possibly masked. Detail inside and out. Clean engine bay. Underseal the car. Just glad the car has a MOT in time for fcs. RE: FCS 2014 - Front Row Submissions - Sian - 14-02-2014 May aswell give it ago! Username: sian First Name: sian Model: 306 gti 6 Modifications: Morrette headlights, cyclones sprayed black. Black badge Lowered 40mm roughly will change before fcs. Custom stainless steel exhaust system with decat. Not much else done to it really. Kept it as standard as possible. And its in one of the best colours possible.. Bianca ![]() ![]() Thanks guys [attachment=14675] [attachment=14676] [attachment=14677] RE: FCS 2014 - Front Row Submissions - cully - 14-02-2014 Username: cully First Name: Paul Model: Ph2 GTi6 Modifications: Lowered front lowered back loud and proud Exhaust 16" white Speedline Turini Alloys colour coded front , rear badges and rub strips window tints rear quarters strut brace colour coded inlet Pas relocation A/C removed slowly returning car to standard form Saving another Future Classic Photos: [attachment=13578] [attachment=13579] [attachment=13580] RE: FCS 2014 - Front Row Submissions - Piggy - 14-02-2014 Not sure if its good enough...will be a lot better come FCS.. Username: PIGGY First Name: James Model: 2.1GTd Modifications: 2.1 xud11bte fully rebuilt, head ported, hdi box, proshift and rods, hybrid 11mm pump, custom exhaust, incdecat, with GT2056s, FMIC, 10mm fuel lines, truck filter. Soon to be dyno'd...???bhp. GTi brakes all round, yellow!! Lowered on BilsteinB4s and eibachs. GTi arbs, powerflex lower arms. Upper and lower braces. (Spax RSXs soon to be fitted with 21mm rear TBs) Removed abs and airbags and a/c. Half leather chequerplate interior with flocked parts in black and grey, auto dim rear view, custom boost gauge pod etc 206 GTi alloys, in cossack grey, spaced out 10mm. GTi splitter, ph1 style skirts. Custom badges/trim/spoiler/healdight masks in cossack grey. JVC touch screen HU, alpine front and rear 6.5" speakers, 2500watt amp, 12" enclosed Alpine sub, raised boot floor, relocated HU, boot battery install. Audi VDO oil and voltage gauges. Photos: [attachment=16053] [attachment=16054] RE: FCS 2014 - Front Row Submissions - Craigus - 14-02-2014 Dead ![]() Photos: ![]() ![]() ![]() RE: FCS 2014 - Front Row Submissions - Jimmyboycheck - 16-02-2014 Username: jimmyboycheck First Name:james Model: black rallye Modifications: 270 degree cams, decat, deresonaterd, k&n, white pro race 3's with r888's, coilovers, xsara vts rear beam, twin cup holder, carbon glave box panel, powder coated: cam covers & inlet, strut brace, nissan alloy rad (Pics to come) RE: FCS 2014 - Front Row Submissions - Grant - 17-02-2014 Username: Grant First Name: Grant Model: 306 XSI Modifications: Engine: -Hydraulic Clutch Conversion -EPAS fitted -Scorpion exhaust -Cone air filter -Upper engine mount chocked with welded in inserts -Billet aluminium lower engine mount -BBM ball socket adjustable gear linkages -GTI 6 Exhaust manifold and downpipe -Mocal 13 row oil cooler Interior: -Interior removed and track-day prepped -Cobra monaco leather bucket seats x2 with custom welded mounts -Sparco harnesses -Custom harness bar -Switch panel and gauges on stripped out dash -Relocated battery to rear -Relocated washer bottle to rear -Panoramic ‘Wink’ Mirror fitted -Plumb in fire extinguisher fitted -BBM Quick shift fitted, with extended shaft -Custom Passenger foot plate fitted Suspension: -BBM Camber adjustable top mounts -Suspension turret holes enlarged for additional camber -Ripp lower strut brace -Seam welded sub-frame -Custom welded in upper strut brace -Rose Jointed drop links -Fully re-bushed front suspension External: -Custom removable lower panel with oil cooler mount -Lowered 50mm all round on coil overs -20mm hubcentric spacers -Golf Mk3 arches -Renault Espace lower splitter -Aero catched bonnet -Aero Catched front bumper -Carbon effect bonnet -De wipered tailgate -Sunroof removed and blanked -Ph3 bodykit fitted -Rallye Blanks fitted -Underside and arches fully stripped back and undersealed -Smoked side repeaters -Mist Jets Overkill list I know, but I just copied a list from my desktop that I use for keeping track myself. Photos: ![]() ![]() ![]() I'll add more recent photos when it looks half sensible and clean. RE: FCS 2014 - Front Row Submissions - Niall - 17-02-2014 Username: Niall First Name: Niall Model: Supercharged 306 GTi6 China Modifications: Looks Genuine blue Cibie masks Black bonnet badge lowered 30mm front and back 16" Speedline Coarse Turini's in anthracite Colour coded boot spoiler Audio Kenwood BT61U ipod head unit Focal 165VB speakers in front Focal 165A1 speakers in rear Boston Acoustics 4 channel amp Various bits of sound deadening Suspension and braking Bilstein B8 Shocks with Eibach 30mm springs Bilstein B4 rear shocks Rippthrough adjustable rose jointed drop links Rippthrough twin bar lower brace Powerflex lower engine mount Gold Hispec Billet4 4 pots on 283mm discs OMP Upper strut brace 23.5mm Torsion bars Engine Fully rebuilt engine Eaton M45 supercharger with a -17% pulley R26 intercooler Omex 600 ecu estimated 5-7psi, 220bhp Longlife Mid sport system with sports cat oil and water EPAS Mounted under boot floor Interior Mac tools fuel pressure gauge as boost gauge Mazda RX8 cloth front seats S16 Blue carpets Black suede roof lining Xtuners custom dials Valeo auto headlight kit 406 auto dim rear view mirror 406 Trip computer on custom high gloss black dash Photos: [attachment=16049] RE: FCS 2014 - Front Row Submissions - Sian - 21-02-2014 Username: sian First Name: Adam Model: 306 gti 6 Modifications: Completely standard black gti 6. Before fcs will be : lowered Clones sprayed De cat exhaust system Crystal headlights Sprayed inlet Few other bits. [attachment=14672] [attachment=14673] [attachment=14674] RE: FCS 2014 - Front Row Submissions - Dum-Dum - 21-02-2014 Username: Dum-Dum First Name: Chris Model: 2002 Meridian SE HDi Estate - 2.1TD converted Modifications: Actual rare wheels, actual slammage and actual tuning, body mods by street furniture and hammer. 2.1TD from Citroen XM, 9mm gov modded and lda played bosch, 2.5" 605 down pipe, de-cat, straight through exhaust, FMIC, HDi gear box with XUD clutch, Ph1 radiator, Air con delete, PAS delete, inline fuel filter, oil catch tank. Brand new Peugeot direct fit 16x7 ET18 steel wheels (still yet to see another set) with 205/45R16 tyres, dropped about 80mm on GMax lowering springs and matched dampers. Citroen C4 302mm brakes, braided lines, Dot 5.1 Brake fluid. GTi6 rear beam. Leather diamond pattern reclining buckets, GTi6 fascia, Gti6 steering wheel, ph2 clocks, forest of magic trees, roof rails removed, smoothed bonnet, smoothed grille, part blacked rear lights, de-badged, xsara mist jets, wind deflectors, fogs removed. She scrubs up quite nicely when I can be bothered. To be done before FCS, Partner 800 P-bushes, 10 or 12mm fuel lines with truck filter. Roof rails better deleted and smoothed. Photos: [attachment=16062] RE: FCS 2014 - Front Row Submissions - Eeyore - 25-03-2014 Username: SRowell First Name: Sam Model: 306 1.8 16V Modifications: Engine: XUX7JP4 1800cc Omex 600 ECU with custom harness Jenvey 45 Throttle Bodies with 90mm Trumpets RichW Lightened Fly Wheel Relocated PAS and De-Air Con GTI6 Gearbox with Bike Brake Lever Reverse Interior: COBRA Monaco Pro Bucket Seats COBRA Subframes SPARCO 3 Point Harnesses OMP Corsica Dished Steering Wheel with OMP Boss Partially Stripped Colour Coded Centre Console Fogs on High mod Black Headlining C5 Auto Dim Rear View Mirror Suspension & Brakes: OMP Upper Strut Brace OMP Lower Strut Brace AVO GTZ Coilovers (60mm Front, 70mm Rear) Meyle HD Wishbones 266mm Bosch Brakes Braided Brake Lines Drilled & Grooved Rears ICE: Kenwood Headunit Focal 165V Components Maystar QXT-500 4 Channel Amp JLB 1000W 12" Sub Fully silent Coated May add the PS2 and flip screen in. Exterior: Fondmetal 4000 Alloys All exterior plastics painted in Graphite Grey Smooth Boot Yellow Fogs Smoked Side Repeaters GTI6 Splitter Dewipered Rear Mist Jets Dyno: 2011: 108hp 2012: 123hp 2014: 129.4hp Photos: ![]() ![]() ![]() RE: FCS 2014 - Front Row Submissions - zx_volcane - 26-03-2014 Assuming I'm available, might be nice Username: zx_volcane First Name: Tom Model: Citroen ZX Modifications: gearbox mounted electronically controlled vnt with supporting engine mods. lowered all round on bilstein b8 + eibach + c5 steelies. + lower strut brace. Interior has leather and many gauges. Photos: [img] ![]() ![]() ![]() RE: FCS 2014 - Front Row Submissions - Danny2009 - 26-03-2014 Username: Danny2009 First Name: Danny Model: 309 d turbo Modifications: lowered 40mm on koni shocks and dampers up front GMAX rear adjustable shocks Cyclones Gti interior Straight through exhaust Hopefully will have changed more before show but as she stands ATM ![]() RE: FCS 2014 - Front Row Submissions - Slam Wagon - 26-03-2014 Not on stand anymore, see you all there though. RE: FCS 2014 - Front Row Submissions - 7057sam - 06-04-2014 Username:7057sam First name:Sam Model:gti6 Modifications: External Black masks running 100k bulbs Gloss black spoiler Will-Speedline tuirinis 16x7 in Renault graphite grey Track wheels-Team dynamics pro race 1.2 16x7 with ao48 Team teko wind deflectors Mechanics Bbm engine mount rich w flywheel rich w pulley Rallye aux Polished cam covers k'n induction kit magnex catback home brew decat nissens rad Suspension kw v1 coilovers ash hybrid arb solid mounts adjustable rear shocks rich w roller bearings Interior Recaro evo 5 seats infinity 6x9 Infinity door speakers kenwood cd/headunit gti6 mats White bulbs throught interior fans wired on to aircon button ![]() ![]() ![]() RE: FCS 2014 - Front Row Submissions - ash23 - 06-04-2014 Username: ash23 First Name:ashley Model:dturbo Modifications: 9mm bosch ph1 front end fmic gauges tsw hockenhiem wheels ph3 interior inc half leathers Photos: [attachment=15064] [attachment=15065] RE: FCS 2014 - Front Row Submissions - ozonehostile - 10-04-2014 Username: ozonehostile First Name: Zakk Model: oem+ gti6 Modifications: Lowered 60mm on gmax shocks + springs and low mileage rear beam to suit Complete suspension and running gear refresh with genuine Peugeot and Baker bm parts Refurbished brake calipers and new discs + mintex 1144 pads all around Black masks Custom badges Rallye blanks Team dynamics pro race 1.2 16" rims Magnex exhaust Powder coated engine components +aircon delete Ph1 gti6 interior K&N ramair filter Factory fresh (hopefully) rallye aux setup and de-resonated ![]() ![]() [URL=http://s1310.photobucket.com/user/ozonehostile/media/Mobile%20Uploads/IMG_20140530_222010_zpspgln8z9t.jpg.html] ![]() RE: FCS 2014 - Front Row Submissions - Jimmyboycheck - 08-05-2014 Few pics as it stands now [/u] RE: FCS 2014 - Front Row Submissions - Jimbo - 08-05-2014 Username: Jimbo First Name: James Model: * 2000 Hdi dturbo * XUD CONVERSION Modifications: Interior: Leaf pattern half leathers Ph2 DT clocks Meridian leather wheel 3 gauges in din slot Boost, EGT, Voltage Headunit relocation to lower console Exterior: Valeo black masked headlights Gti spoiler Tinted rear lights Custom front rear badges anthracite and gloss black Refurbed saxo vts wheels in Bmw graphite grey Lowered 80mm all round Rallye blanks Mist jets Debadged bootlid Suspension brakes etc : Ta tec coilovers and rear shocks Lowered 80mm Refurbed and painted Gti beam Gti6 front brakes new discs and pads 4x new maxxis victra ma-z1 tyres 195 45 15 Engine: Full xud engine conversion 100k mile dhy block, stripped bare, painted block, new crankshaft seals, head gasket head set head bolts Bosch ve pump, modified governor and ground pin etc Garrett GT1752s turbo from saab 93 2.0T Custom mounted t2 actuator 2.5 inch downpipe Turbo back 2.5 inch homebuilt exhaust system Focus tdci hidden front mount intercooler Slim line fans Scorpion rear box 2inch hard intercooler pipe kit Manual boost controller Toyosports alloy catch/breather tank 63mm intake piping 24psi of boost and lots of fuel estimated 150/60bhp Photos: ![]() ![]() ![]() RE: FCS 2014 - Front Row Submissions - Niall - 08-05-2014 Have updated the photos on mine ![]() RE: FCS 2014 - Front Row Submissions - Scott - 08-05-2014 Thanks guys! Spot on, looking awesome! RE: FCS 2014 - Front Row Submissions - Piggy - 08-05-2014 (08-05-2014, 07:24 PM)Niall Wrote: Have updated the photos on mine Me too, with new details ![]() RE: FCS 2014 - Front Row Submissions - Dum-Dum - 09-05-2014 And also updated mine. RE: FCS 2014 - Front Row Submissions - Matt - 09-05-2014 I would submit mine, but needs lows first RE: FCS 2014 - Front Row Submissions - Sian - 14-05-2014 Ive got no chance ![]() RE: FCS 2014 - Front Row Submissions - cully - 14-05-2014 (14-05-2014, 09:00 AM)Sian Wrote: Ive got no chancesian some of these cars will not be making FCS as they are no longer roadworthy or the owners won't be going so everyone has a chance of being selected as i believe the front row is quite large ![]() FCS 2014 - Front Row Submissions - rocker8742 - 14-05-2014 If this is still open may put mine in again Re: RE: FCS 2014 - Front Row Submissions - WiNgNuTz - 14-05-2014 (14-05-2014, 09:26 AM)cully Wrote:(14-05-2014, 09:00 AM)Sian Wrote: Ive got no chancesian some of these cars will not be making FCS Qft (14-05-2014, 09:38 AM)rocker8742 Wrote: If this is still open may put mine in again Best hurry up then, FCS isn't far off now, we'll be making the decisions very soon. |