+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=17)
+--- Thread: Cambelt Quote (/showthread.php?tid=20666)
Cambelt Quote - lewisdmz - 21-01-2014
What's a fair price for a full cambelt kit including waterpump, coolant, labour etc on a gti6.
First quote i've got is is £355 incVAT.
RE: Cambelt Quote - Grant - 21-01-2014
TBH that is about the going rate. A Gates, SKF, Dayco or equivalent OEM kit is about £80-90 with a water pump. Then circa 3 hours labour on top with coolant added in. It adds up unfortunately.
RE: Cambelt Quote - RetroPug - 21-01-2014
http://www.306gti6.com/forum/showthread.php?id=155403
£220 fitted.
RE: Cambelt Quote - shaverspeedengineering - 21-01-2014
jus outa curiosity are there top pully's in the kit? ... i spent in exess of "400" green queens on getting my belt and pump done ...
.. needless to say i waited patiently for a week till i could pay me bill ... 1 mile up the road , i felt confident enuf to put 40 sheets of juice in... along with a new vanilla-roma magic tree ..... and boom!! i hadnt even hit 3rd gear and was nowhere near thrashing it ... and the top pully literally fell apart!!!!!... completely ruined!!!... please bare that in mind mr original poster.... 3 months down the line and im still bitter as f*ck... pennyless .. and a bus wanker no less.....
RE: Cambelt Quote - Piggy - 21-01-2014
Top pulley? As in cam pulley?
RE: Cambelt Quote - shaverspeedengineering - 21-01-2014
(21-01-2014, 06:29 PM)Piggy Wrote: Top pulley? As in cam pulley?
yea... 2 of them isnt there ... front one of wich fell to bits .. ;-(
RE: Cambelt Quote - Niall - 21-01-2014
A cam belt kit is the belt, tensioner and idler. Cam pullies are not included. I suspect you had the 3 bolt type which were known to have issues.
RE: Cambelt Quote - shaverspeedengineering - 21-01-2014
(21-01-2014, 06:31 PM)Niall Wrote: A cam belt kit is the belt, tensioner and idler. Cam pullies are not included. I suspect you had the 3 bolt type which were known to have issues.
ok cool .. to be fair im not 100% sure on the bolt configuration.... jus mearly trying to warn the o,p of possible disasters... shit like this can pottentially cause a lot of trouble around the dinner table in the homestead like.... jus trying to save m8ee from that .... if ya hear wot im saying ...
RE: Cambelt Quote - lewisdmz - 21-01-2014
(21-01-2014, 06:13 PM)Grant Wrote: TBH that is about the going rate. A Gates, SKF, Dayco or equivalent OEM kit is about £80-90 with a water pump. Then circa 3 hours labour on top with coolant added in. It adds up unfortunately.
+ the bastard VAT. Probably the most un-rewarding way to spend £350 on your motor, at least if you're paying for some thing to be fixed you feel like you're getting something
(21-01-2014, 06:19 PM)RetroPug Wrote: http://www.306gti6.com/forum/showthread.php?id=155403
£220 fitted.
That's not really a going rate to be fair, just a bloke in his garage doing it on the side I suspect. Still would be tempting if I didn't live about 200 miles away, although I'm not sure i'd chance it with a cambelt no matter how good his reputation - if the worst were to happen you'd be f*cked.
RE: Cambelt Quote - Niall - 21-01-2014
(21-01-2014, 06:57 PM)lewisdmz Wrote:(21-01-2014, 06:19 PM)RetroPug Wrote: http://www.306gti6.com/forum/showthread.php?id=155403
£220 fitted.
That's not really a going rate to be fair, just a bloke in his garage doing it on the side I suspect. Still would be tempting if I didn't live about 200 miles away, although I'm not sure i'd chance it with a cambelt no matter how good his reputation - if the worst were to happen you'd be f*cked.
He used to be a Peugeot master tech and now works on planes i think. I know several people who have used him who say he is very good.
RE: Cambelt Quote - lewisdmz - 21-01-2014
(21-01-2014, 07:08 PM)Niall Wrote:(21-01-2014, 06:57 PM)lewisdmz Wrote:(21-01-2014, 06:19 PM)RetroPug Wrote: http://www.306gti6.com/forum/showthread.php?id=155403
£220 fitted.
That's not really a going rate to be fair, just a bloke in his garage doing it on the side I suspect. Still would be tempting if I didn't live about 200 miles away, although I'm not sure i'd chance it with a cambelt no matter how good his reputation - if the worst were to happen you'd be f*cked.
He used to be a Peugeot master tech and now works on planes i think. I know several people who have used him who say he is very good.
I'm not saying he isn't, but you can understand how not having work done with a registered business is risky should something go wrong (no matter how remote).
RE: Cambelt Quote - Tom - 21-01-2014
I would always rather take my car to a bloke in a shed who has nothing but solid experience on that engine, than a "proper garage".
Shed wins everytime.
RE: Cambelt Quote - RetroPug - 21-01-2014
If you're not comfortable with doing it with Deepak (the guy I linked), which to be honest I can understand, then I had mine done by Storm Autos (peugeot specialist) in Witney, Oxfordshire for 280 not including the waterpump, and they were very good, assured me they'd pin the engine with the proper locking pins etc.
However if you're 200 miles from London Oxfordshire's probably not all that close either.
RE: Cambelt Quote - PugRory - 21-01-2014
I've had a quote of around £250, Garage by where I live and I thought that was expensive! got around 10k left before mine needs a change though
RE: Cambelt Quote - Mattcheese31 - 22-01-2014
(21-01-2014, 07:38 PM)Tom Wrote: I would always rather take my car to a bloke in a shed who has nothing but solid experience on that engine, than a "proper garage".
Shed wins everytime.
this^^^ and i pay £130 for cambelt change . .
RE: Cambelt Quote - Grant - 22-01-2014
And I don't pay anything :p
RE: Cambelt Quote - Mattcheese31 - 22-01-2014
(22-01-2014, 09:12 AM)Grant Wrote: And I don't pay anything :p
don't get me wrong, if i had a garage and it hadn't been the middle of winter when my aux belt shredded and got caught up in the cam belt, i'd have done it myself . .
RE: Cambelt Quote - miles - 22-01-2014
Not that far off if your VAT registered which add's £60.00 ish, I always use Peugeot kit's as It provides cover under there Trade club if anything fails, this does exclude the cam and lower pulleys thou which unless changed now can slip and if unlucky can snap the belt too,
But I have known the later Cam pulley's to fail as well