306oc - Peugeot 306 Owners Club & Forum
Rusted Rocker Cover 1.4 TU engine - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: TU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=18)
+--- Thread: Rusted Rocker Cover 1.4 TU engine (/showthread.php?tid=20099)



Rusted Rocker Cover 1.4 TU engine - shazilla - 03-01-2014

Hello all,

My Rocker Cover on my 1.4 TU engine is rusted!

Any ideas on what i could do!

Thanks

Sam


RE: Rusted Rocker Cover 1.4 TU engine - Jimbo - 03-01-2014

Get a new one.......


RE: Rusted Rocker Cover 1.4 TU engine - k3ogh - 03-01-2014

I found a mint one in a scrappy off a 206, failing that strip it back and re-paint but it's a pain in the sass prepping them.....


RE: Rusted Rocker Cover 1.4 TU engine - Eeyore - 03-01-2014

I have a good condition one in my shed. Never going to use it again. PM me if you would like it.


RE: Rusted Rocker Cover 1.4 TU engine - Alan_M - 03-01-2014

Had the same on my 1.4 306. Just get another. I got one off an older TU (205) so it didn't have the mounting studs for the lead holder. No problem though, couple of bolts/nuts/fibre washers and all good. Doesn't leak anymore....that was really irritating me!


RE: Rusted Rocker Cover 1.4 TU engine - WiNgNuTz - 03-01-2014

Wire brush and elbow grease.


RE: Rusted Rocker Cover 1.4 TU engine - mikey b - 03-01-2014

As above wire bush and paint it or get new one I have seen this fair bit on 206s


RE: Rusted Rocker Cover 1.4 TU engine - John1.4 - 03-01-2014

grinder with a nice flap disc, 10 mins with that to get the rubbish off, Kurust or similar, can of smooth or satin black hammerite... Smile


RE: Rusted Rocker Cover 1.4 TU engine - shazilla - 03-01-2014

Picture!


RE: Rusted Rocker Cover 1.4 TU engine - k3ogh - 03-01-2014

Rocker cover gasket is weeping to bud! If you replace get an OE as the cheap ones are to hard and don't seal properly, I know because I tried a few before I got it to seal and torque it up properly

This was my effort a while back..... Ended up swapping it for a mint 206 as said previous...

Before
[Image: image_zps8b99412a.jpg]

After
[Image: image_zpsb94b6b4c.jpg]

[Image: image_zpsb1e9c3d7.jpg]


RE: Rusted Rocker Cover 1.4 TU engine - shazilla - 03-01-2014

That looks awsome!


RE: Rusted Rocker Cover 1.4 TU engine - k3ogh - 04-01-2014

Not the best pics but you can spruce them up, flocked ones look good too


RE: Rusted Rocker Cover 1.4 TU engine - shazilla - 19-01-2014

Love the air filter!

(03-01-2014, 09:22 PM)k3ogh Wrote: Rocker cover gasket is weeping to bud! If you replace get an OE as the cheap ones are to hard and don't seal properly, I know because I tried a few before I got it to seal and torque it up properly

This was my effort a while back..... Ended up swapping it for a mint 206 as said previous...

Before
[Image: image_zps8b99412a.jpg]

After
[Image: image_zpsb94b6b4c.jpg]

[Image: image_zpsb1e9c3d7.jpg]