+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: phase 3 to phase 1? (/showthread.php?tid=19971)
phase 3 to phase 1? - rd070707 - 30-12-2013
Hi guys what all would be needed to convert a ph3 to a ph1 front?
RE: phase 3 to phase 1? - Craigus - 30-12-2013
lights, bonnet, slam panel, grill, bumper (not sure about wings)
RE: phase 3 to phase 1? - rd070707 - 30-12-2013
And all the panels will attach and line up okay? Yeah I assume I need the wings too
RE: phase 3 to phase 1? - Eeyore - 30-12-2013
mmmm
rub strips
headlights
bonnet
grille
front bumper
slam panel?
RE: phase 3 to phase 1? - Craigus - 30-12-2013
(30-12-2013, 01:46 PM)rd070707 Wrote: And all the panels will attach and line up okay? Yeah I assume I need the wings too
Yeah should all line up okay, quite a few people have done it.
RE: phase 3 to phase 1? - ozonehostile - 30-12-2013
I've just done exactly this.
Youl need a phase 1 :
Bonnet
Slam panel
Bumper
Headlights
Grill
Wings are the same apart from the i
Side repeaters, phase 3 have slightly larger holes so ph1 don't fit tight
Other things you will need to change:
For the lights, easiest way I found to plug ph1 lights straight into the ph3 plugs was to gut an old pair of crystals, remove all the wires and remove the wires from the plugs where they connect to the bulb (phase 1 lights just have 3 pins on the bulb)
On the other end, keep the connector from the crystals so they still plug straight in. No modifications to the car loom needed. Same applies for the sidelights.
Oh and you will need to drill some holes in the ph1 slam panel to mount the ph3 style expansion tank bracket on.
Everything else fits straight on
RE: phase 3 to phase 1? - rd070707 - 30-12-2013
Thanks dude all the parts shouldnt be too dear to pick up
RE: phase 3 to phase 1? - ozonehostile - 30-12-2013
(30-12-2013, 01:56 PM)rd070707 Wrote: Thanks dude all the parts shouldnt be too dear to pick up
Rep welcome :-P haha
No worries man, any questions about wiring the lights just ask. I could draw you one of my amazing sketches haha
RE: phase 3 to phase 1? - L.J - 11-01-2014
Usually its the other way round, people want to go from ph1 to phase 3. Fair play for being different i suppose. Personally prefer ph3