+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Replacement arch protection (/showthread.php?tid=19823)
Replacement arch protection - Daniel306 - 23-12-2013
Going to replace both arches on the 205, as they have no arch liners im looking for a way to protect them.
Im thinking that painting them with hammerite, then some stone guard like original and then a coat of underseal with added waxoil. would this be enough or is there something else i should do, possibly powder coat them(would that be overkill)?
RE: Replacement arch protection - Pompey306mark - 23-12-2013
Underseal then wax oil works a treat.
Good idea to paint first I guess depends if you have any bare metal there now.
RE: Replacement arch protection - Daniel306 - 23-12-2013
There new so will come in that crap weld through primer, that will most likely come off with thinners
RE: Replacement arch protection - Pompey306mark - 23-12-2013
Yea give a good old hammeriting.
RE: Replacement arch protection - Martin306 - 23-12-2013
Yeah strip em back to bare metal, weld in, then prime, prime, prime, paint, paint, underseal then waxoil.
Powder coat would be a bad idea, because it will chip.
Or just hammerite the shit out of it.
RE: Replacement arch protection - welshpug - 23-12-2013
sod hammerite, get some real paint, don't forget the seam sealer to the wheelarch guard and the front inner wings.
RE: Replacement arch protection - Daniel306 - 23-12-2013
What other paint should i use?