Drive Belt Length - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10) +--- Thread: Drive Belt Length (/showthread.php?tid=19470) |
Drive Belt Length - darrenjlobb - 10-12-2013 Could any of the resisdant HDI gurus tell me what length aux belt is required for a V plate 306 HDI. Its a non air con model...but has PAS with the pas pump up top... Dont have a belt to measure to get rough idea...and internet seems full of different options...slightly un useral not to have AC i guess... Also can anyone confirm, the spring loaded tensioner, is that the same across ALL 306 hdi's? Or does that differ also? Cheers in advance. RE: Drive Belt Length - Piggy - 10-12-2013 doesnt it have the spring/damper tensioner AND a manual adjusted aswell? RE: Drive Belt Length - Dum-Dum - 10-12-2013 6pk1173 is what you use when you've removed the AC from a HDi RE: Drive Belt Length - darrenjlobb - 10-12-2013 Hm pretty sure its longer than that, ive just mocked up a bit of string to get rough idea, and seems around 1500mm but obviously thats very rough.. RE: Drive Belt Length - Dum-Dum - 10-12-2013 This is a 6pk 1173 fitted to a HDi RE: Drive Belt Length - darrenjlobb - 10-12-2013 Hm, the setup I have is different to that...this is a model from the factory without AC...it has a small roller idler at the bottom and a sprung / dampened tesioner like that at the top... RE: Drive Belt Length - cully - 10-12-2013 i think when people remove the ac they dont convert it to full Non ac with belt 1173 but the right belt is 1470 as it supose to double back around a second manual tensioner RE: Drive Belt Length - Poodle - 10-12-2013 6pk1470 is the non-ac belt iirc, so 1470mm. Ah Cully got there first lol. RE: Drive Belt Length - darrenjlobb - 10-12-2013 Which makes sence with my rough measure of 1500. THanks guys! RE: Drive Belt Length - Poodle - 10-12-2013 RE: Drive Belt Length - darrenjlobb - 10-12-2013 SO is T / G tensioners the same across all of them? RE: Drive Belt Length - Poodle - 10-12-2013 Oh yeah sorry, forgot that bit lol. As far as i've seen the top spring-loaded tensioner looks identical across the various models, the other one/two vary. Haven't exactly seen loads of non-ac models in scrap yards though, so could be different on some i guess. RE: Drive Belt Length - darrenjlobb - 10-12-2013 Ive already replaced the little idler at the bottom, id say they just added that to stop belt vibration, im going to run a guess and hope the ecentic tensioner is the same, cant see any reason why they would change it so ill order up and see... RE: Drive Belt Length - welshpug - 10-12-2013 you could of course just bang the vin into servicebox to get the correct number, then cross reference :p which tells me that it is indeed 5751 55 used on ac and non ac DW10 306's. 5750 XT is the belt part number, 6pk 1468 |