+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect (/showthread.php?tid=19257)
Pages:
1
2
XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - strictly_perv - 01-12-2013
Hello all, I'm possibly putting all my XUD goodies up for grasp and am just gauging interest at the moment.
Here's what I have-
Oil cooler again ready to bolt on with sandwich plate £80
GTI calipers visible parts painted hammerite yellow £30
eBay side entry intercooler roughly 60cm wide 20 wide £35
GT2052s bolt on setup £250
3" boost pipes and hoses almost enough for a 306 set up £50
Derv doctor inlet adaptor £50
*new- also have a full 5dr leaf pattern half leathers including door cards £50
Pictures upon interest.
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - londondan86 - 01-12-2013
What's the paddle like to drive with? Could be interested...
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Frosty - 01-12-2013
I cant speak for how Max finds his but I got a 4 paddle unsprung and to be fair it isn't that bad to drive. Just judders a bit on pull a ways and takes a little getting use to driving.
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Tom - 01-12-2013
Think max's is a 5 paddle so should be a touch smoother than frostys 4 paddle.
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - 306pc - 01-12-2013
Any pics of the front mount set up available pal? Interested.- the forge set up...
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - londondan86 - 01-12-2013
Cheers lads
Max, pm me best price posted on the cutch
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - padge - 01-12-2013
pic of turbo.
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Tom - 01-12-2013
(01-12-2013, 07:06 PM)padge Wrote: pic of turbo.
In the xud section theres loads
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - mikey b - 01-12-2013
You selling the 11mm
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Dave - 02-12-2013
I've got an unsprung paddle and can say they are hardly any different to the stock clutches.
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - strictly_perv - 02-12-2013
Yeah unsprung paddles aren't that bad at all to be honest.
Miley the 11mm will be up next week
XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - ben dturbo - 02-12-2013
How much wood u post fmic for mate
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - strictly_perv - 02-12-2013
The Forge FMIC has sold earlier sorry. Also clutch as provisionally sold pending payement.
I do have the other intercooler with the 2.5" piping?
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - ginge191 - 02-12-2013
give you a tenner for the turbro eh eh eh eh.
![[Image: SpinnyTrollface.gif]](http://images.wikia.com/callofduty/images/c/c0/SpinnyTrollface.gif)
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - jamie23 - 04-12-2013
How much you after for other piping you have and is it all there for a setup
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - mitsirfishi - 06-12-2013
If the clutch doesn't sell does it fit on HDI ? and will it take stage 2 torques?
XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Bananalad - 06-12-2013
I would take the brakes..
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Piggy - 06-12-2013
(06-12-2013, 11:40 AM)mitsirfishi Wrote: If the clutch doesn't sell does it fit on HDI ? and will it take stage 2 torques?
you would need to change the clutch arm and cable bracket to XUD box ones
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Craigus - 06-12-2013
Oil cooler still available?
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - strictly_perv - 06-12-2013
Jamie, the pipes came fitted to the car when I bought it but you will need 1 elbow and a reducer for the standard turbo outlet.
Banalad, brakes are still available.
Mitsirfishi, clutch has sold.
Craigus, oil cooler is still available PM me if you want it.
Thanks
XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Bananalad - 08-12-2013
Are they in good condition? Everything there to upgrade from my dturbo brakes? And could you pm me a price posted to Ireland?
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - strictly_perv - 09-12-2013
Just calipers, all move freely including the nipples. The paint work is just painted for what can be seen through the wheels so it's nothing amazing haha.
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Nick306td - 09-12-2013
Pm'd
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Piggy - 09-12-2013
what type is the aux bracket?? pas on top?
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Jimbo - 09-12-2013
Pics of the side entry.cooler??
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Chris_90 - 10-12-2013
(02-12-2013, 08:21 PM)strictly_perv Wrote: The Forge FMIC has sold earlier sorry. Also clutch as provisionally sold pending payement.
I do have the other intercooler with the 2.5" piping?
(09-12-2013, 09:31 PM)Jimbo Wrote: Pics of the side entry.cooler??
just a heads up
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - strictly_perv - 11-12-2013
When I say side entry cooler I mean side not twin pass as few people PM'd have been confussed. But there's pics on my Slam'dan thread at the beginning.
Right so the 11mm pump is removed now and I will be packing all the bits up tonight so will be ready for a quick dispatch after payements.
I'm dropping the turbo to £250 posted and it will include a boosted XUD inside sticker for the lucky buyer
XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - sherman306 - 12-12-2013
How much for the 11mm mate?
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - Piggy - 12-12-2013
(09-12-2013, 09:21 PM)Piggy Wrote: what type is the aux bracket?? pas on top?
??
RE: XUD FMIC setup, paddle clutch, oil cooler, GTI brakes, GT20 bolt on ect - strictly_perv - 13-12-2013
Sorry piggy cars scrapped now