+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: Turbo to manifold bolts (/showthread.php?tid=19091)
Turbo to manifold bolts - Daniel306 - 23-11-2013
Just about to refit my turbo, its held on to the manifold by 3 M8 studs, How can i make sure they don't come loose? was going thinking about locktight but will it take the heat or is them coming loose not a real problem on diesels? i could also lock two nuts on
RE: Turbo to manifold bolts - Jimbo - 23-11-2013
Its not a problem usually do them up tight and they be fine
RE: Turbo to manifold bolts - Daniel306 - 23-11-2013
just wound them up tight then put 2nd nuts on them, hope they will be fine as its really hard to access them on a 307
RE: Turbo to manifold bolts - Chris - 23-11-2013
Go get some new nuts from pug? They look to be special locking ones.
RE: Turbo to manifold bolts - Ricky - 23-11-2013
You can get locking nuts that use a metal insert instead of the nylon so they dont melt, I used copper lock nuts on my manifold and they never came loose.