Driveshaft oil seal? - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Driveshaft oil seal? (/showthread.php?tid=18844)

Driveshaft oil seal? - Tom - 13-11-2013 Guys i need help with which oil seals to buy. I dont think i have a standard xud box, mine seems far shorter ie 80mph = 4k+rpm. Does anyone know if Peugeot just use the same set for all of it? Or where the gearbox code will be so i could find out? I can only assume its on the side or bottom because i couldnt see anything on top When i get my baker lower mount i though i might aswell do seals since the shaft has to come out. RE: Driveshaft oil seal? - Jimbo - 13-11-2013 Most pug boxes use the same seals One slightly larger than the other RE: Driveshaft oil seal? - cully - 13-11-2013 double check these fit yours via service box!!!! GEAR-BOX SEAL 40X58-10 3121 44 11.00 GBP GEAR-BOX SEAL RIGHT29X47-11 3121 46 12.94 GBP you should be able to find the pair for under £10 delivered on Evil bay http://www.ebay.co.uk/itm/PEUGEOT-405-DRIVESHAFT-OIL-SEALS-GEAR-BOX-DIFF-SEALS-/220615213097?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item335db10029 Driveshaft oil seal? - Frosty - 13-11-2013 I know there a lot of money but it's defo worth the extra to get genuine seals. I put a cheaper 1 in and it leaked straight away RE: Driveshaft oil seal? - Tom - 13-11-2013 Dont know how to use service box and dont know what box i have so we're in a spot of shit there! RE: Driveshaft oil seal? - darrenjlobb - 13-11-2013 Sure there shot? make sure drivers side shaft is pulled th ENTIRE way in on the middle bearing, if its not it wont meet the seal, and will leak RE: Driveshaft oil seal? - Tom - 13-11-2013 I assumed shafts tbh, didnt think there was many other places it could leak from. It only leaks when its hot and its not much just you can see it in puddles. RE: Driveshaft oil seal? - mr_fish - 14-11-2013 For reference Both my HDi box and XUD box have the number on the right side under the clutch cable bracket. something like 20CH33