+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Wiring loom dodgy (/showthread.php?tid=1876)
Wiring loom dodgy - studturbo - 29-02-2012
Right i have just replaced my engine and got it all wired up and it turns over with the key fine.
But i can still make all my light on the dash come on with pressing the horn and without the key in HELP please
Thanks stewart
Re: Wiring loom dodgy - Niall - 29-02-2012
First rule of weird electrical problems. Check earths! Try the one by the pedals and your engine ones
Re: Wiring loom dodgy - studturbo - 29-02-2012
Looked at them thay all look fine cant see no problems its all wired it same place it come from
Re: Wiring loom dodgy - Moonstone2.0 - 29-02-2012
sounds def like an earth. My controls went crazy, hazards going on when turning on the radio, lights flashing when putting wipers on...all the earths looked fine but the one in the divers footwell had its washer slighty out and that was the culprit!
Re: Wiring loom dodgy - Niall - 29-02-2012
They might look fine but there might be something interfearing. Really need to check well. Could always get a multimeter and do a continuity check
Re: Wiring loom dodgy - studturbo - 29-02-2012
oh i think thay aint got washers on them could that be the problem ?