+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Nimrod/ouragan spacer's/bolt sizes? (/showthread.php?tid=18743)
Nimrod/ouragan spacer's/bolt sizes? - Mitch - 10-11-2013
Got some 16" ouragans, 205/45/16's, main question is what size spacers do people usually run with these? i can get hold of some 15mm's off a mate but unsure if they'd be too big or not? And am i right in saying a standard cyclone bolt is 37mm?
RE: Nimrod/ouragan spacer's/bolt sizes? - welshpug - 10-11-2013
depends which offset wheels you have, there's ET28 and ET20.
RE: Nimrod/ouragan spacer's/bolt sizes? - londondan86 - 10-11-2013
If they are the ouragans from a 406 then no spacers are required
RE: Nimrod/ouragan spacer's/bolt sizes? - Ben - 11-11-2013
You can get away with no spacers if your beam is in very good nick.
I'd use 15/20mm spacers on the back and 10mm on the front to get them sitting nicely.
RE: Nimrod/ouragan spacer's/bolt sizes? - Mitch - 11-11-2013
Well they are ouragans, not sure what from though, definitely not a chance in them going on the back, may do of I cut some of the plastic linings out but still would be very very close, I had some a couple of years ago, they had 195's on though and fit fine, so if I use the 15mms and get some 55mm extended bolts?
RE: Nimrod/ouragan spacer's/bolt sizes? - welshpug - 11-11-2013
look at the offset marking on the rear of the spokes, they are all stamped ouragan, some are ET28 (off a 206) and some ET20 (off a 406)
RE: Nimrod/ouragan spacer's/bolt sizes? - Mitch - 11-11-2013
Just been and looked they are 28's, so I'll have to use the 15mm spacers, cyclone bolt is 37mm so I may as well get some 55mm bolts?
RE: Nimrod/ouragan spacer's/bolt sizes? - Curt - 11-11-2013
I ran mine with 15mm spacers, that was with 195/45/16s though.
RE: Nimrod/ouragan spacer's/bolt sizes? - Frosty - 11-11-2013
Would 20mm spacers be to big for nimrods?
RE: Nimrod/ouragan spacer's/bolt sizes? - Mitch - 11-11-2013
Think you'd just get away with 20's to be honest
RE: Nimrod/ouragan spacer's/bolt sizes? - Chris_90 - 12-11-2013
(11-11-2013, 08:09 PM)welshpug Wrote: look at the offset marking on the rear of the spokes, they are all stamped ouragan, some are ET28 (off a 206) and some ET20 (off a 406)
If there all stamped ouragon? Why are nimrods called nimrods? Lol
I no there different that the bolt holes are larger on ouragon's well so it said in Google when I was looking in to it
RE: Nimrod/ouragan spacer's/bolt sizes? - welshpug - 12-11-2013
(12-11-2013, 04:17 PM)Chris_90 Wrote:(11-11-2013, 08:09 PM)welshpug Wrote: look at the offset marking on the rear of the spokes, they are all stamped ouragan, some are ET28 (off a 206) and some ET20 (off a 406)
If there all stamped ouragon? Why are nimrods called nimrods? Lol
I no there different that the bolt holes are larger on ouragon's well so it said in Google when I was looking in to it
No idea!! I have never seen a wheel with Nimrod cast into it, nor will you find one on servicebox.
All the bolt holes are the same anyway, they have the later tye bolt with a taper under the head so that the cars can use a standard taper seat steel spare wheel.
RE: Nimrod/ouragan spacer's/bolt sizes? - Chris_90 - 12-11-2013
(12-11-2013, 06:26 PM)welshpug Wrote:(12-11-2013, 04:17 PM)Chris_90 Wrote:(11-11-2013, 08:09 PM)welshpug Wrote: look at the offset marking on the rear of the spokes, they are all stamped ouragan, some are ET28 (off a 206) and some ET20 (off a 406)
If there all stamped ouragon? Why are nimrods called nimrods? Lol
I no there different that the bolt holes are larger on ouragon's well so it said in Google when I was looking in to it
No idea!! I have never seen a wheel with Nimrod cast into it, nor will you find one on servicebox.
All the bolt holes are the same anyway, they have the later tye bolt with a taper under the head so that the cars can use a standard taper seat steel spare wheel.
http://306oc.co.uk/forum/archive/index.php?thread-1682-2.html
On that thread that's were it told me about the bolt holes
RE: Nimrod/ouragan spacer's/bolt sizes? - welshpug - 12-11-2013
"look" bigger, they aren't, also the single wheel picture is of the 14" version so it will look different, especially with the plastic wheel bolt covers.