+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: What Bosch lines go to what injector (/showthread.php?tid=18711)
What Bosch lines go to what injector - Danny2009 - 08-11-2013
As title my lines are all individual
Anyone know where they go
Delivery valve on pump
Number one being top row nearest rad
Number 2 top row nearest block
Number 3 bottom row nearest rad
Number 4 bottom row nearest block
Injector one being pump/cambelt side number 4 being box side
Dv 1-4 will suffice
Got issues like timings out tried advancing pump belt timing it spot on stumped
Cheers
RE: What Bosch lines go to what injector - HDIkyle - 08-11-2013
Should only fit one way just try them how I did mine
RE: What Bosch lines go to what injector - Chris_90 - 08-11-2013
(08-11-2013, 09:32 PM)HDIkyle Wrote: Should only fit one way just try them how I did mine
I was gonna say this, surely they only fit one way?
RE: What Bosch lines go to what injector - HDIkyle - 08-11-2013
straight end to pump.and bent end to injection should be easy to see then
RE: What Bosch lines go to what injector - zx_volcane - 08-11-2013
ok so from your notation
delivery valve 1 goes to injector 3
delivery valve 2 goes to injector 1
delivery valve 3 goes to injector 4
delivery valve 4 goes to injector 2
RE: What Bosch lines go to what injector - Danny2009 - 08-11-2013
I'm 95% sure there right had them on and off 4 times while there loose
Just it's runnin like timings out white smoke but pumps timed perfect and advancing it makes no difference stumped to what it could be
Cheers tom, there on correct, so why is it running like a bitch
RE: What Bosch lines go to what injector - HDIkyle - 08-11-2013
Pump ok? Firing on all 4?
RE: What Bosch lines go to what injector - Danny2009 - 08-11-2013
It's hunting a little on idle and a very light whisp of white smoke timing is spot on lines are all ok not sure what it is
RE: What Bosch lines go to what injector - karl1989 - 08-11-2013
I'd say dodgy injector
RE: What Bosch lines go to what injector - zx_volcane - 08-11-2013
yeah sounds like an injector issue to me too,
prob just need a decent clean / reseal
or even a set of new nozzles shouldn't set you back tooooo much depending on where you go.
RE: What Bosch lines go to what injector - Danny2009 - 08-11-2013
Think turbos f*cked too really lost the love