Turbo to downpipe bolts - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Turbo to downpipe bolts (/showthread.php?tid=18652) |
Turbo to downpipe bolts - Danny2009 - 06-11-2013 It really fucks me off having to hold the bolt on the top while undoing the nut from underneath Can I weld the bolt into the elbow so I can just undo the 10mm nuts from underneath Or do they need to be able to move? Cheers RE: Turbo to downpipe bolts - Anton - 06-11-2013 Thats what ive done on mine RE: Turbo to downpipe bolts - Danny2009 - 06-11-2013 Out the welder comes then Not sure if they needed to move with engine movement RE: Turbo to downpipe bolts - Chris_90 - 06-11-2013 The only down side is if you snap a bolt why tightening it up, will be a ball ache to sort RE: Turbo to downpipe bolts - Danny2009 - 06-11-2013 I've welded it up with a nice juicy bolt none of that 8mm thick shit bolt pug put in RE: Turbo to downpipe bolts - Tom - 06-11-2013 Standard downpipe FTL! |