Exhaust bend, downpipe into tunnel - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Exhaust bend, downpipe into tunnel (/showthread.php?tid=18595)

Exhaust bend, downpipe into tunnel - Tom - 04-11-2013 Does anyone know what angle this is? I thought it would be a 45 but when i looked it looks like its a bit steeper than that? RE: Exhaust bend, downpipe into tunnel - Piggy - 04-11-2013 think its 60degrees RE: Exhaust bend, downpipe into tunnel - Tom - 04-11-2013 60 is what im thinking, i swear i read it somewhere just dont want to buy it for it to be wrong RE: Exhaust bend, downpipe into tunnel - Piggy - 04-11-2013 Im sure thats what I bought... search around there is a thread somewhere on all the lengths/angles needed to make a system...its what I used. RE: Exhaust bend, downpipe into tunnel - darrenjlobb - 04-11-2013 Around 60 iirc, you can make it right by cutting pipe at slight angle, yes, this is a "bodge" but it really dosnt matter / for a few degrees isnt even noticable. RE: Exhaust bend, downpipe into tunnel - Tom - 04-11-2013 Some threads say 45 and some say 60 :/ Then some say you need a 60 at the back and others say 45! AAAHHH RE: Exhaust bend, downpipe into tunnel - Tom - 07-11-2013 I think its 60, will know for sure soon! RE: Exhaust bend, downpipe into tunnel - mr_fish - 07-11-2013 what elbow have you got off your turbo tom? RE: Exhaust bend, downpipe into tunnel - Tom - 07-11-2013 2.5" tight radius thing into a flexi. RE: Exhaust bend, downpipe into tunnel - 306Puggy - 08-11-2013 Oh shit. So it's not a 45 afterall? What a fecking farce. That means my exhaust elbow was doomed from the start! Now I've got to work out 60 degrees which I have no idea how to do (45 degrees is more obvious) and this is why I thought it was 45 degrees: http://306oc.co.uk/forum/thread-16440.html He didn't have the decency to come back and tell the guy he was wrong! So other people find the thread (using the search function ) and then think it is right and go and do that just to find it's wrong. RE: Exhaust bend, downpipe into tunnel - Frosty - 16-04-2014 Did you ever find out what angle was needed? Was it 60deg? RE: Exhaust bend, downpipe into tunnel - Tom - 17-04-2014 Yes mate 60 is grand at the bottom of the downpipe