+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: 406 HDI 90/110 (/showthread.php?tid=18479)
406 HDI 90/110 - THE_Liam - 30-10-2013
Probably a daft question, but are these engines identical to the 306 HDI? Take the same maps with the same results? Been offered a very cheap 406 estate that could be very handy...
RE: 406 HDI 90/110 - Toms306 - 30-10-2013
Some use a Siemens ECU which isn't easily mappable...
Re: 406 HDI 90/110 - THE_Liam - 31-10-2013
Thanks mate I'll check that out. Any other differences?
RE: 406 HDI 90/110 - Jonny81191 - 31-10-2013
Yeah, the 110 has an intercooler.
Oh, and seimens management is horrible to drive.
Re: 406 HDI 90/110 - THE_Liam - 31-10-2013
So theoretically with a 110 I could just stick a torque restricted stage 2 map on it?
RE: 406 HDI 90/110 - Piggy - 31-10-2013
if its not a siemens.
IIRC a lot of the 110s were siemens
Re: 406 HDI 90/110 - Pete - 31-10-2013
90's are Siemens aswell IIRC
RE: 406 HDI 90/110 - Jonny81191 - 31-10-2013
All the 110's are bosch iirc. The 90's were mostly seimens, certainly the later ones.
RE: 406 HDI 90/110 - Piggy - 31-10-2013
(31-10-2013, 07:13 AM)Jonny81191 Wrote: All the 110's are bosch iirc. The 90's were mostly seimens, certainly the later ones.
ah I got it the wrong way round...I knew it was mostly the one n not the other.
my bad
RE: 406 HDI 90/110 - THE_Liam - 31-10-2013
So it needs to be a 110. Not sure what it is, he just said it's a 2 litre diesel, ruling out either XUD or the 136 HDi...
If it's a 110 I'm quite keen, my dog hates being in the back of the 306, no enough room for him
RE: 406 HDI 90/110 - Toms306 - 31-10-2013
The 136 is also a 2.0HDi, although I didn't know they put those in the 406.
Re: RE: 406 HDI 90/110 - THE_Liam - 31-10-2013
(31-10-2013, 11:57 AM)Toms306 Wrote: The 136 is also a 2.0HDi, although I didn't know they put those in the 406.
The 136 is a 2.2 mate
RE: 406 HDI 90/110 - Toms306 - 31-10-2013
(31-10-2013, 12:45 PM)THE_Liam Wrote:(31-10-2013, 11:57 AM)Toms306 Wrote: The 136 is also a 2.0HDi, although I didn't know they put those in the 406.
The 136 is a 2.2 mate
My bad, the 2.0 in everything else (307, 407 etc) is 136, but the 2.2 in the 406 is also 136! That's confusing lol.
Re: RE: 406 HDI 90/110 - THE_Liam - 31-10-2013
(31-10-2013, 12:49 PM)Toms306 Wrote:(31-10-2013, 12:45 PM)THE_Liam Wrote:(31-10-2013, 11:57 AM)Toms306 Wrote: The 136 is also a 2.0HDi, although I didn't know they put those in the 406.
The 136 is a 2.2 mate
My bad, the 2.0 in everything else (307, 407 etc) is 136, but the 2.2 in the 406 is also 136! That's confusing lol.
I think the 136 in the 307 is a 16v, don't quote me on that though...
RE: 406 HDI 90/110 - Poodle - 31-10-2013
The 2.0 136 engines are 16v, yeah.
406 HDI 90/110 - devils_fuel - 31-10-2013
My ex's 110GTX flew, x reg so I guess a Bosch?