+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: guides on changeing dturbo alternator tensioner? (/showthread.php?tid=18337)
guides on changeing dturbo alternator tensioner? - paul7278 - 26-10-2013
Anybody goot a guide on changeing the alternator tensioner on a ph1 dturbo non aircon model?
RE: guides on changeing dturbo alternator tensioner? - silverzx - 26-10-2013
It's pretty easy mate, slacken alternator bolt of, push it back to slacked belt, replace belt, push back into original position, tighten bolt.
I found lying on the floor with the wheel off gave the best access.
RE: guides on changeing dturbo alternator tensioner? - Tom - 27-10-2013
Drivers wheel and arch liner out and you can get at it easy enough. Then theres a 6mm allen bolt in middle of the pulley then another 6mm allen headed bolt half way down the tensioner. Then theres one on the bottom facing up which controls the tension, so you'll need to adjust that first to slacken the bolt. but the top 2 need to cracked off aswell so the tensioner can move. If any of that makes sense. Once you see the thing it will!
RE: guides on changeing dturbo alternator tensioner? - paul7278 - 27-10-2013
thanks Tom