+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: advancing a pump (/showthread.php?tid=1783)
advancing a pump - karl1989 - 25-02-2012
hello every one. gota my car running today with no oil leaks and pulls better now changed the turbo but not as good as i want. seems abit draggy. want to advance the pump to make it lively but is that a yes or no dont no what to do.
Re: advancing a pump - 4WayDiablo - 25-02-2012
go for it, see what happens, adjust it to get the best
Re: advancing a pump - Atterz - 25-02-2012
You want to time the pump so that it isnt too advanced or retarded. The standard timing is perfect imo and then just allow the pump to do its own thing with dynamic advancing. However by advancing the pump it will normally start a lot easier, good tip if your tight and cba replacing glow plugs!
Re: advancing a pump - karl1989 - 25-02-2012
do i advance towards the back of the car and do it about 10mm?
Re: advancing a pump - anto - 27-02-2012
There is barely 10mm of movement on the bracket slots.
Its hard to tell you how much to do it by. Go in 1mm increments until it starts to get quite rattly.
Re: advancing a pump - Dum-Dum - 01-03-2012
Yeah, start of with about 2-3mm advanced then go in 1mm increments until it starts to get rattly.
You WILL need a 13mm obstruction / half moon spanner
RE: advancing a pump - CJ_Derv - 21-08-2012
Does anyone know where abouts stock would in relation to stud location in slots or would that be too easy
Re: advancing a pump - Dan! - 21-08-2012
It's about half way to two thirds advanced in the slots standard
RE: advancing a pump - CJ_Derv - 21-08-2012
(21-08-2012, 07:15 AM)Dan! Wrote: It's about half way to two thirds advanced in the slots standard
Cheers Dan!!
Re: advancing a pump - Dan! - 21-08-2012
No worries xxx
RE: advancing a pump - CJ_Derv - 21-08-2012
(21-08-2012, 07:56 AM)Dan! Wrote: No worries xxx
PMSL ^^^ made my morning haha