+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: 15" steels - red (/showthread.php?tid=1756)
15" steels - red - ginge191 - 24-02-2012
Selling on behalf of my friend.
Made out of aluminium so very light (4.4kg per rim) 4x108 fitment will fit citroens and Peugeot and should also fit fords
£80 if gone before Tuesday, no tyres.
any questions i can relay them on or attempt to answer myself - can be delivered to the south coast area - from portsmouth - cornwall and anywhere in between on March 29th for an extra £10 or to FCS
![[Image: 431296_10151332299955253_585695252_23079...8859_n.jpg]](http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/431296_10151332299955253_585695252_23079577_908528859_n.jpg)
Re: 15" steels - red - Chris - 24-02-2012
Come with the bolts too?
Re: 15" steels - red - Connor - 24-02-2012
Steels made out of Ally? MINDFUCK
Re: 15" steels - red - Jonny b - 24-02-2012
hhhmmnnn tempted
Re: 15" steels - red - ginge191 - 24-02-2012
Chris Wrote:Come with the bolts too?
bare with me
Jonny b Wrote:hhhmmnnn tempted
first some first serve...also advertised on FCS facebook page
Re: 15" steels - red - Chris - 24-02-2012
I'm not interested in them but they do require special spinning tapered bolts.
If they are included then there a bargain!
Re: 15" steels - red - ginge191 - 24-02-2012
they don't include bolts - but as far as i'm aware, they dont require any special bolts.
Re: 15" steels - red - Kezzieboy - 24-02-2012
Picture doesn't work for me
Is it off facebook?
And if we're thinking of the same ones then it just needs tapered bolts the 'special tapered bit' is so that they work on both tapered steels and flat seated alloys Chris
Re: 15" steels - red - Foxy-jim - 24-02-2012
They look good. But are the really steels? Haha.
Re: 15" steels - red - Chris - 24-02-2012
There the ones off the c5, they do requier the bolts, as normal ones will eat away at the tabered bolt seats.
Only thing is the bolts are 2.80 plus the vat each!
Re: 15" steels - red - ginge191 - 25-02-2012
Chris Wrote:There the ones off the c5, they do requier the bolts, as normal ones will eat away at the tabered bolt seats.
Only thing is the bolts are 2.80 plus the vat each!
i''ve just asked him and he says they use standard tapered bolts, no special bolts required. he ran them for quite a while.
Re: 15" steels - red - ginge191 - 25-02-2012
Kezzieboy Wrote:Picture doesn't work for me
Is it off facebook?
And if we're thinking of the same ones then it just needs tapered bolts the 'special tapered bit' is so that they work on both tapered steels and flat seated alloys Chris
yes, it was taken from facebook.
visually similar to standard alloys, but a LOT lighter and in red (cherry-ish red) for that colour you can't see
Re: 15" steels - red - Poodle - 25-02-2012
Chris Wrote:There the ones off the c5, they do requier the bolts, as normal ones will eat away at the tabered bolt seats.
Only thing is the bolts are 2.80 plus the vat each!
This. If he's been running standard bolts then he's damaging them, saxo owners eh!? :roll:
Pity I'm thoroughly skint atm, would love a set of these.
Re: 15" steels - red - Foxy-jim - 25-02-2012
How wide are they?
Re: 15" steels - red - Chris - 25-02-2012
As poodle said, I've owen 4 sets of these wheels and I know they need the bolts, end of.
There 6x15 et18
4.4kg as said
The early ones used flat bolts and are prone to cracking round the bolt holes. The later ones were revised with tapered holes awith spinning taper collers on the bolts.
Re: 15" steels - red - 4WayDiablo - 25-02-2012
They look pink :-S
Re: 15" steels - red - ginge191 - 25-02-2012
Chris Wrote:As poodle said, I've owen 4 sets of these wheels and I know they need the bolts, end of.
There 6x15 et18
4.4kg as said
The early ones used flat bolts and are prone to cracking round the bolt holes. The later ones were revised with tapered holes awith spinning taper collers on the bolts.
chees chris - i dont/wouldnt know, only passing on messages
thanks!