Project Shed. - Printable Version

Project Shed. - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Project Shed. (/showthread.php?tid=17527)

Project Shed. - Face. - 22-09-2013

Where to Start.

She's a phase 2 DT in white.
I bought this off a friend of a friend.the car has seen many owners most have treated this car like a cheap one night stand lol.

the car needs a lot work which I'll slowly try and do as money is tight and my lack of knowledge.

So far I got it running.
There was a massive air leak stopping the car from running.
New leak off bung/cap sorted this.
It's had a new fuel filter from me old one was clogged.

Sorted an oil leak,Rocker cover gasket fixed this.

New D seal old one was fooked:http://www.ebay.co.uk/itm/Citroen-Peugeot-D-Turbo-306-Intercooler-Seal-D-ZX-Xsara-036522-/251329104832?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a8461cbc0

The oil is like tar even when warm!
Bad points:
Needs new Injector seals, drop links, offside door loom, rear bumper and wings as there denty, alloys refurbished ,headlight loom repaired, new headlights, new glow plugs as these are crap they cost 12 for 4 posted, new door handle, aerial, pump needs adjusting as she's running lean, and a full service including cam-belt and water pump.Probably more as I've most likely forgot something.

Car needs the body work sorting but I did wash and wax this before my mate sold it to his friend in Hereford(who I bought it off.)So this has helped.

Good:
It was cheap.
2 x basically new tires.
Full S/S exhaust system.
Cyclones.
lowered.
New Front discs and pads fitted when it was my mates, by us.
Drives and stops

Have oil + filter, Bosch Duraterms, New battery terminals (as I hate the twist fitting.)
here/ on order.

I will need help with one!

http://s290.photobucket.com/user/pumasnake1/media/306%20xud%20phase%202/SAM_0142_zps7ea65c26.jpg.html?sort=3&o=5

RE: Project Shed. - samass - 22-09-2013

wow, um, it's got a nice engine? lol

sorry, but apt project title, good luck with it!!

RE: Project Shed. - THE_Liam - 23-09-2013

That needs some pretty heavy work doing, glad to see someone saving a knackered one rather than just scrapping it, D-Turbos are starting to get rarer...

Re: Project Shed. - WiNgNuTz - 23-09-2013

Certainly got your work cut out there mate! Interesting paint job on the clones, had to look twice to realise what they were! lol

Good luck with this, will be interested to see what you do with it. Smile

RE: Project Shed. - thefastest1 - 23-09-2013

Woah, a 306dtub in a sorrier state then mine! Kudos ! Will be interesting to see where you go with this Smile

RE: Project Shed. - Face. - 23-09-2013

Gave the car a quick wash, removed most of the red house paint that was covering it.Cleaned all the drain channels and confirmed a source of the leak in the roof.

the leak is coming from the aerial base.
So will need a new one.

Started removing the injectors to put new seals in.But I've had to order a socket so will have to wait till this and the seals/copper washers come.
I have ready to be fitted glowies and new leak off pipe, better safe than sorry.

for anyone needing a socket for the injectors think this is the one you'll need Big Grin

RAPER 16216 EXPERT 27MM 1/2" SQUARE DRIVE DIESEL INJECTOR SOCKET

Come on pay-day!

RE: Project Shed. - me-tm - 23-09-2013

Wow, that's scabby. lol

RE: Project Shed. - procta - 23-09-2013

a trip down to the local scrappy and your laughing. so half of that list should be thinned right out with in a day.
where is the intercooler gone?

RE: Project Shed. - Face. - 23-09-2013

(23-09-2013, 03:44 PM)procta Wrote: a trip down to the local scrappy and your laughing. so half of that list should be thinned right out with in a day.
where is the intercooler gone?

Well with funds I'd be laughing.local scrapyard's can cost an arm and a leg.Slow and Steady wins the race and all that.

Inter-cooler is in the garage.

also needs more than I listed here, loads more!Mostly just loads of niggles.

RE: Project Shed. - 306Puggy - 23-09-2013

Wow, this car is more tatty than mine and that's saying something! It certainly makes a change from people just giving up when the paint starts to hang, makes for a good sleeper! But yeah, I think we should have a competition for most bashed up/patched up cars on here lol!

RE: Project Shed. - procta - 23-09-2013

(23-09-2013, 04:00 PM)Face. Wrote:
(23-09-2013, 03:44 PM)procta Wrote: a trip down to the local scrappy and your laughing. so half of that list should be thinned right out with in a day.
where is the intercooler gone?

Well with funds I'd be laughing.local scrapyard's can cost an arm and a leg.Slow and Steady wins the race and all that.

Inter-cooler is in the garage.

also needs more than I listed here, loads more!Mostly just loads of niggles.

your telling me about some scrappies wanting the earth!
like you say a bit at a time, and things will sharp move on quickly!

RE: Project Shed. - Face. - 23-09-2013

(23-09-2013, 04:07 PM)306Puggy Wrote: Wow, this car is more tatty than mine and that's saying something! It certainly makes a change from people just giving up when the paint starts to hang, makes for a good sleeper! But yeah, I think we should have a competition for most bashed up/patched up cars on here lol!

I'm tempted to rat it, if all else fails!

RE: Project Shed. - ozonehostile - 23-09-2013

I recognise it from somewhere.....

RE: Project Shed. - thefastest1 - 23-09-2013

Mines semi ratted, or as someone put it 'brokenracecar' look hehe

RE: Project Shed. - Face. - 23-09-2013

(23-09-2013, 05:38 PM)ozonehostile Wrote: I recognise it from somewhere.....

You should. Wink

(23-09-2013, 05:48 PM)thefastest1 Wrote: Mines semi ratted, or as someone put it 'brokenracecar' look hehe

Yours is getting there, looks cool.

RE: Project Shed. - Pugmarshall - 23-09-2013

Brads old car?

RE: Project Shed. - Face. - 23-09-2013

(23-09-2013, 06:13 PM)Pugmarshall Wrote: Brads old car?

Yep and many others old car.

Feel free with ozone to pop over and help.
If ye need any let me know always up for tinkering.

RE: Project Shed. - ozonehostile - 24-09-2013

Have you dared look at the rear seat belt mounting points yet? Judging by the state of the rest of it I'm expecting rust lol

RE: Project Shed. - Matt - 24-09-2013

Christ that is a mess. I really hope you pull it off and make this a minter Smile

RE: Project Shed. - Face. - 24-09-2013

(24-09-2013, 11:28 AM)ozonehostile Wrote: Have you dared look at the rear seat belt mounting points yet? Judging by the state of the rest of it I'm expecting rust lol

Had a quick look(always look when buying)one has a liner and the other it had a liner at some point.it's not to bad as far as I can tell.
will get a new liner and under-seal as much as possible at some point.
If it needs welding it'll become parts due to the cost.

Come to Kington you know you want to lol.

(24-09-2013, 11:38 AM)Matt Wrote: Christ that is a mess. I really hope you pull it off and make this a minter

Me to, but don't expect much as I'm a noob.

RE: Project Shed. - ozonehostile - 24-09-2013

I've got loads of spare bianca wings if you need them?

RE: Project Shed. - Face. - 24-09-2013

(24-09-2013, 02:23 PM)ozonehostile Wrote: I've got loads of spare bianca wings if you need them?

Yes please, how much? both of mine are denty Undecided

Pm me.

RE: Project Shed. - Face. - 27-09-2013

Quick update.
Injectors cleaned and new seals they were a bast**d to do.
Copper seals were tightened so much, I found rusted rear hub nuts easier!
Marked the injector seats a little as I had to hammer the seals out but it's all good.
getting the injectors to seal was fiddly but patience won in the end.

Also replaced the leak off pipes and bung/cap.
Once the fuel system was bled and everything sealed she started on the button.

Also quickly degreased/steamed the engine bay a lot better but I'll get it cleaner another day.

RE: Project Shed. - Face. - 29-09-2013

Oil vapour hose is cracked so will be getting one from pug come pay day

Car needed a bit of gas to start so in went the new plugs.
New Glow-plugs are in and new battery terminals.

Old plugs:

New plugs in and start:

RE: Project Shed. - thefastest1 - 29-09-2013

Looking good pal.

You sticking a bosch in there some point?

RE: Project Shed. - Face. - 29-09-2013

(29-09-2013, 04:58 PM)thefastest1 Wrote: Looking good pal.

You sticking a bosch in there some point?

Funny you should say that, I have been looking but I have not managed to find a Bosch set up.If I do I'll buy one and fit it(try to more like lol) .
I've only managed to find pumps on there own. at extortionate prices.