+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: ECU number '249' (/showthread.php?tid=17459)
ECU number '249' - jammapic - 19-09-2013
Hi,
Has anyone got an ECU with '249' on it? I've written a couple of stage 2.5 maps for my hybrid turbo'd 306 HDi and just want to ask a couple of questions...
JP
RE: ECU number '249' - cully - 19-09-2013
??? questions
if its to test the map you will be lucky to get someone to test an unknown map
RE: ECU number '249' - jammapic - 19-09-2013
I've got a HDi with a hybrid turbo, big clutch, intercooler etc etc and 2 ECU's so I can brick one! :-)... I'll test my own mapping ;-) Seems to be running ok so far and making some good power, but I wanted to ask where people with mapped motors, on this ECU number would see any smoke if any, and rev limits they run into / how the fuelling tails off etc.
JP
RE: ECU number '249' - cully - 19-09-2013
you might be better talking with Pro-steve or whippy both seem to have disappeared again though
RE: ECU number '249' - Eeyore - 19-09-2013
How did you write maps? I really want to know!
RE: ECU number '249' - jammapic - 19-09-2013
Erm, read books, learn how ecus work, buy the right equipment, get the right software and be careful!
RE: ECU number '249' - Ruan - 19-09-2013
Start searching, it's a very hostile place out there when searching about and everyone will rip you a new one for asking the wrong thing... Ask the right thing and you might start to get a bit of help...
I rekon it's been ~1.5 years and I'd only just really be confident enough to start playing properly with EDC15s...
RE: ECU number '249' - jammapic - 19-09-2013
Correct Ruan! I started learning about these about 6 or 7 years ago when I had a Golf TDi and always kept my eye in since then really.
First couple of maps I wrote were terrible, but they worked. More recently, they've been ok!
JP
RE: ECU number '249' - darrenjlobb - 20-09-2013
Ive got a compelte ecu / bsi / key etc, but bit of a farce to change the lot i guess.
RE: ECU number '249' - jammapic - 20-09-2013
I'd probably just write the immobiliser out Darren, much easier.... Are you running an ECU on yours now then?
RE: ECU number '249' - Poodle - 20-09-2013
Ah good to see someone managing to make some progress with mapping, fingers crossed you get the results you're after!
RE: ECU number '249' - Ruan - 20-09-2013
(20-09-2013, 07:39 AM)jammapic Wrote: I'd probably just write the immobiliser out Darren, much easier.... Are you running an ECU on yours now then?
If you're on a 249 you can't write the immo out in e2prom
That's only on 3 plug ECUs...
If you've got a chip flasher and an soic8 clip you have to reflash the 5p08 immo chip on the board.
RE: ECU number '249' - jammapic - 20-09-2013
Soldering is my forté ;-)
RE: ECU number '249' - Ruan - 20-09-2013
Surely it's easier to get an SOIC8 clip and do it rather than desoldering and then having to get an SOIC8 to DIP8 adapter?