+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: Newbies (https://www.306oc.co.uk/forum/forumdisplay.php?fid=24)
+--- Thread: Hello! (/showthread.php?tid=17149)
Hello! - Martin306 - 08-09-2013
Suppose I should introduce myself.
I am Martin and I'm from in and around Perth.
I've had a standard 306 HDi in the past, and a 405 with a DTurbo, so I'm not new to 306's or the XU engine. I've helped a friend build and destroy a 306 XSi (2.0 16v) lol. Currently I don't own one though as I have a 106 1.5 NAAAAAAAD. Had it Dyno'd at 61.5hp @ 4800 and 84lb.ft @ 1600
So, why am I here? I'm here for the GO-NAD supporters. Sam's car has tempted me too much, and I figured that a small boost would make the car a lot better to drive. Nothing insane though, I'll leave that to him
at least it won't be my conrods going ping - I've already been there and done that.
RE: Hello! - Kimmie - 08-09-2013
Welcome
RE: Hello! - Herby7 - 08-09-2013
Welcome
RE: Hello! - Grant - 08-09-2013
Welcome to the circus!
RE: Hello! - Martin306 - 10-09-2013
(08-09-2013, 06:14 PM)Grant Wrote: Welcome to the circus!
Circus? plz, this place looks tame.
I spend a lot of time on SaxP lol
RE: Hello! - Piggy - 11-09-2013
SaxP is just gay....this is like a russian mad gun slinging circus!!!
welcome!
I wana do a low boost turbo on my wifes naaad.. but she wont let me...still, 70mpg is something to love!
RE: Hello! - pugjohn306 - 11-09-2013
Welcome mate...(i see piggy is thread trawling again lol)
RE: Hello! - Piggy - 11-09-2013
no?! Im welcoming a new member...as you are!?
And we have a car in common too!?
RE: Hello! - pugjohn306 - 11-09-2013
(11-09-2013, 08:41 AM)Piggy Wrote: no?! Im welcoming a new member...as you are!?
And we have a car in common too!?
Lol cmon iv saw your name on loads of post this morning gahahahahah.
RE: Hello! - Piggy - 11-09-2013
you will see that EVERY morning!
part of my breakfast ritual!
RE: Hello! - pugjohn306 - 11-09-2013
(11-09-2013, 08:45 AM)Piggy Wrote: you will see that EVERY morning!
part of my breakfast ritual!
Lol fair enuff i do pop on in the morning whilst sat outside having a brew and a ciggy lol
RE: Hello! - Toms306 - 11-09-2013
(11-09-2013, 08:48 AM)pugjohn306 Wrote:(11-09-2013, 08:45 AM)Piggy Wrote: you will see that EVERY morning!
part of my breakfast ritual!
Lol fair enuff i do pop on in the morning whilst sat outside having a brew and a ciggy lol
How many hands do you have John!?
Also hi Martin.
RE: Hello! - pugjohn306 - 12-09-2013
(11-09-2013, 10:48 AM)Toms306 Wrote:(11-09-2013, 08:48 AM)pugjohn306 Wrote:(11-09-2013, 08:45 AM)Piggy Wrote: you will see that EVERY morning!
part of my breakfast ritual!
Lol fair enuff i do pop on in the morning whilst sat outside having a brew and a ciggy lol
How many hands do you have John!?
Also hi Martin.
Lol cig in left hand mug of tea not a cup in right hand ass on seat lop..
RE: Hello! - Mac22 - 13-09-2013
Hiyaaaaaa welcome
RE: Hello! - samass - 21-09-2013
Martin!! Good to see you over here buddy!
Ignore piggy, we all do
now you have to see if you can beat chris_90 to boost
RE: Hello! - Jimbo - 21-09-2013
Yeah piggy is the forums resident troll!
Likes to get his post count up and generally think hes the man
RE: Hello! - Martin306 - 21-09-2013
Well, I've got someone from SaxP interested in boosting his NAD as well
Just looking for decent parts that's all. The bottom end of the 1.5D is hard to break, Peugeot just forgot to fit the turbo.
I'm pretty troll resistant, I'm hard to break.
Who cares about post counts these days anyway hahhahahaahhahahaSam, I think I'm going to boost using the standard Bosch pump with no compensator - I won't have idling problems with that
Just to simplify things even more, also trying to be cheap initially just to see what it can do. Need to get my hands on a second 1.5D engine first though I think. Just incase it goes ping, as my backup car has an engine of 4.0 capacity and it's a tad expensive to run 60 miles a day of back roads.
RE: Hello! - samass - 21-09-2013
Oh I think I might have been able to break the bottom end....
RE: Hello! - Martin306 - 21-09-2013
(21-09-2013, 05:34 PM)samass Wrote: Oh I think I might have been able to break the bottom end....
Sounded like the bottom end was broken when you uploaded that video the other week there lol
I remember when I threw a rod in my NAD last year. Good times.
If you've broken a rod, I hope it's snapped in the middle. because the fix for that is forged rods
Pistons are pretty thick, I think they could take a good beating.
To be fair though, you were running more than double standard power.
Boosting to 100-120hp will do me fine I think.
RE: Hello! - samass - 21-09-2013
[video=youtube]Watch "f*cked nad!" on YouTube - https://www.youtube.com/watch?v=qQae3AvSOu4&feature=youtube_gdata_player[/video]
RE: Hello! - Martin306 - 21-09-2013
You've spun the bottom end (probably stretched a rod bolt?). I know that noise, the rod hasn't come off yet
You won't need a new head though, just regrind the valves. mine was okay and it was hammering like that for 150 mile round trip to glasgow and back. You could see the valve outline on the top of the piston lol
p.s when the rod comes off, be prepared to whack your head off the steering wheel when it jams between the crank and the block.
RE: Hello! - Eeyore - 02-10-2013
welcome martin. Check out samass turbo NAD!
RE: Hello! - Martin306 - 02-10-2013
(02-10-2013, 03:32 PM)SRowell Wrote: welcome martin. Check out samass turbo NAD!
Thanks.
I have met the go-nad in person at Knockhill. It's a complete shed
but character is what makes these cars fun Selling my 106GTi to add to the car fund, and I'll buy a turbo and a decent welder.
RE: Hello! - samass - 02-10-2013
Shed??? :O prick!
Nah, she is a bit of a wreck lolz
RE: Hello! - Martin306 - 02-10-2013
(02-10-2013, 06:49 PM)samass Wrote: Shed??? :O prick!
Nah, she is a bit of a wreck lolz
At least your front inner wings aren't rusty... because they're not there!
C'mon be fair, it needs another shell. And an engine
Safe pikey bodge jobs ftw!