Ph3 central locking on ph1/2 - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23) +--- Thread: Ph3 central locking on ph1/2 (/showthread.php?tid=16944) |
Ph3 central locking on ph1/2 - Frosty - 31-08-2013 Basically I was just wondering if it is possible to swap the central locking from a ph3 to a ph1/2 so it can have the longer range RE: Ph3 central locking on ph1/2 - Piggy - 31-08-2013 dude theres a current thread on this exactly... http://306oc.co.uk/forum/thread-16717.html RE: Ph3 central locking on ph1/2 - Frosty - 31-08-2013 My bad. I fort that that thread was for the different fobs RE: Ph3 central locking on ph1/2 - Piggy - 31-08-2013 you iz welcome RE: Ph3 central locking on ph1/2 - Daniel306 - 31-08-2013 (31-08-2013, 09:15 PM)Frosty Wrote: Basically I was just wondering if it is possible to swap the central locking from a ph3 to a ph1/2 so it can have the longer range Yes it is, but you need to change the Door locks/looms, loom under the carpet and the one behind the dash and fit the Bsi It's lots of work unless you already have the dash out Ph3 central locking on ph1/2 - Frosty - 31-08-2013 Not really worth the hassle then Ph3 central locking on ph1/2 - rocker8742 - 31-08-2013 I thought about this a while back mate and there's a fair list of things to change, suppose if you already have anything it wouldn't be too bad though RE: Ph3 central locking on ph1/2 - Daniel306 - 31-08-2013 Iv done it but i also fitted electric windows ,auto wipers and replaced the driver's door hinge loom |