+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Starter motor; XUD/XU10 (/showthread.php?tid=16576)
Starter motor; XUD/XU10 - ginge191 - 17-08-2013
Are these starter motors interchangeable seein as they both use be3 boxes; would an starter motor from an XUD fit a gti6/rallye?
RE: Starter motor; XUD/XU10 - Jenkosowls - 17-08-2013
Yes but the xu10 will burn out on any long cranking sessions. The xud motors are very beefy I burnt out an xu motor in less than a week in a xud
Xud on an xu would be fine
RE: Starter motor; XUD/XU10 - Ruan - 17-08-2013
Yeah, they'd fit, but you'd roast it, the windings are tiny and they're geared all different.
You'll see High Compression GTi6s on bodies ETC using Diesel starters.
RE: Starter motor; XUD/XU10 - Piggy - 17-08-2013
what about a xud11 starter!!
RE: Starter motor; XUD/XU10 - Rich306 - 19-08-2013
(17-08-2013, 09:04 PM)Ruan Wrote: Yeah, they'd fit, but you'd roast it, the windings are tiny and they're geared all different.
You'll see High Compression GTi6s on bodies ETC using Diesel starters.
So you are saying that the XUD Starter motor will fit the Rallye ok?? lol posts haven't been clear.
RE: Starter motor; XUD/XU10 - Jenkosowls - 19-08-2013
In essence
Xud onto xu is ok
Xu onto xud itl burn out eventually as there not beefy for the high compression
RE: Starter motor; XUD/XU10 - Rich306 - 19-08-2013
Thank you, that's all I need to know!
be giving Ginge a bell soon as mine stuck again this morning