Stage 3 XUD project - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Stage 3 XUD project (/showthread.php?tid=160) |
Re: Stage 3 XUD project - padge - 10-02-2012 Clutch has started to slip today :/ Test drove a mapped HDI earlier aswell Stage 3 XUD project - padge - 11-02-2012 And now my radiators popped ! Re: Stage 3 XUD project - Dan! - 11-02-2012 Sell it. Stage 3 XUD project - padge - 11-02-2012 Dont be silly! Re: Stage 3 XUD project - karl1989 - 11-02-2012 what you doing replacing the rad and clutch at the same time Stage 3 XUD project - padge - 11-02-2012 Yeah, fast road clutch i reckon Re: Stage 3 XUD project - padge - 11-02-2012 clutch in Dturbo, a pull clutch? Re: Stage 3 XUD project - Jacko - 11-02-2012 Yeah I think so Re: Stage 3 XUD project - padge - 11-02-2012 aye, thanks mate! Re: Stage 3 XUD project - Jacko - 11-02-2012 S'alright Re: Stage 3 XUD project - darrenjlobb - 11-02-2012 Indeed pull, what clutch are you planning on putting back in it? Might as well put something decent in now if your planning on running more power in the future.... Stage 3 XUD project - padge - 11-02-2012 Another valeo for now, some kind of paddle when cash allows. Re: Stage 3 XUD project - Chris - 12-02-2012 Jps setups only like 200 from cg (mates just bough one for his hdi) So its only like 80 more than a gen valeo item anyway. Re: Stage 3 XUD project - darrenjlobb - 12-02-2012 There pretty easy to kill though, My CG clutch after 2k of abuse looks like a pile of burnt scrap...works well though when in use, just made cheaply I guess Re: Stage 3 XUD project - Atterz - 12-02-2012 Errrm id be inclined to fill the rad with liquid metal for the time being if the rest of its in good condition. After having to buy 300 quids worth of Nissens Rads id seriously just do that. Stage 3 XUD project - padge - 12-02-2012 Rad is off, just need to source another now, and then drop the box Re: Stage 3 XUD project - Atterz - 12-02-2012 Not coming to James' next weekend now then? Stage 3 XUD project - padge - 12-02-2012 Im not sure, possibly! Re: Stage 3 XUD project - karl1989 - 12-02-2012 think ive got a alluminium rad in the shed. all have a look and see what the condition is like Stage 3 XUD project - padge - 12-02-2012 Already sourced one now Re: Stage 3 XUD project - Jacko - 12-02-2012 Get it onnnn! Oh yeah, and pictures.. Pictures are a must Re: Stage 3 XUD project - padge - 12-02-2012 clutch can wait untill the end of the month, priority is a rad and i'm going to detail the car this week/tommorow Stage 3 XUD project - padge - 16-02-2012 Plates finally on! For those that dont know, my name is kyle pagett Re: Stage 3 XUD project - mark_airey - 16-02-2012 It looks awesome but is the rear plate supposed to be wonky Re: Stage 3 XUD project - studturbo - 16-02-2012 mark_airey Wrote:It looks awesome but is the rear plate supposed to be wonky Stage 3 XUD project - padge - 16-02-2012 Its the angle its taken Re: Stage 3 XUD project - cwspellowe - 16-02-2012 padge Wrote:Its the angle its been put on EFA Re: Stage 3 XUD project - HDIkyle - 16-02-2012 Looks good, but i'm afraid the spacing is all wrong . I'm heading to Shef tomorrow might call in on way by for a Pic Stage 3 XUD project - padge - 16-02-2012 Think i know why its holding back, one of the injectors are f*cked, from cold it smokes really bad, but if you tap the revs really quick theres one knock sound and again and again after each quick rev, give it a good blast, get it warm and no smoke then it wont knock Re: Stage 3 XUD project - mark_airey - 16-02-2012 Since mine does the same thing with the knocking/smoke/miss from cold and when I was trying to sort it I had 3 sets of Injectors tested all of which were fine and all of which have been in my car I am inclined to believe that this is not your problem.............. |