+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Anyone interested in my 16" borbet A?? (/showthread.php?tid=15302)
Anyone interested in my 16" borbet A?? - Pompey306mark - 06-07-2013
These will most likely be up from sale at the end of the month.
16" rim Et20. Running Pirelli p zero Nero two almost new and two used but still with good tread.
Pics of these all over the place, but if you need some in here just ask.
Looking for around £500 with the tyres.
RE: Anyone interested in my 16" borbet A?? - kingy - 06-07-2013
pcd???
RE: Anyone interested in my 16" borbet A?? - Pompey306mark - 06-07-2013
4x108
RE: Anyone interested in my 16" borbet A?? - Dum-Dum - 06-07-2013
7.5 or 9?
RE: Anyone interested in my 16" borbet A?? - Pompey306mark - 06-07-2013
7.5 width.
RE: Anyone interested in my 16" borbet A?? - darrenjlobb - 06-07-2013
Maybe?
RE: Anyone interested in my 16" borbet A?? - kingy - 06-07-2013
not many of these made in pug fitment so ive heared.
RE: Anyone interested in my 16" borbet A?? - bigcheez2k3 - 07-07-2013
Hmm...what are they like for fitment? Any rubbing on a low 306?
I know yours was a fair bit down.
RE: Anyone interested in my 16" borbet A?? - Pompey306mark - 07-07-2013
Depends what spacers you use. I am running ET0 but since this are only Et20 you only really need 5mm spacers.
A bit of rear arch work for my offset though.
RE: Anyone interested in my 16" borbet A?? - kingy - 07-07-2013
(07-07-2013, 08:33 PM)bigcheez2k3 Wrote: Hmm...what are they like for fitment? Any rubbing on a low 306?
I know yours was a fair bit down.
Ive got about 65mm drop and 20mm spacers and ive had to flare the arches and rip out the arch lining and underseal it. Well worth it tho.
RE: Anyone interested in my 16" borbet A?? - Curt - 07-07-2013
Will need less work on a 3dr as there's more room
RE: Anyone interested in my 16" borbet A?? - kingy - 07-07-2013
(07-07-2013, 09:11 PM)Curt Wrote: Will need less work on a 3dr as there's more room
The main problem I had was the bumper. The bit near the door is fine and didn't need any work.
RE: Anyone interested in my 16" borbet A?? - Pompey306mark - 19-07-2013
Bump.