+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Driver side central locking unit and wiring (/showthread.php?tid=15250)
Driver side central locking unit and wiring - Welshy_Pete - 05-07-2013
I need to test the wiring on the socket plug for the central locking unit.
Also how about a test for the central locking unit?
I got 2 multi meters but not the best at using them so any help would be great. I've got the door card of ready to start.
I've just fitted a new loom in the driver door. The windows, mirrors and interior light all work fine.
306 hdi thanks
RE: Testing driver side central locking unit and wiring - pugjohn306 - 05-07-2013
Dont quote me mate but with a multi meter u need to locate the live feed on it then i think you test the corrosponding wires IE red live and say green and purple go to locking mech you put the negative feed on the green or purple and a reading should come up....like i said dont quote me lol...
RE: Testing driver side central locking unit and wiring - Welshy_Pete - 07-07-2013
So is there anymore idea's on this as I would really like to test the motor and wiring out asp.
thanks
RE: Testing driver side central locking unit and wiring - Piggy - 08-07-2013
it just receives a switching live feed of 12vs
to unlock the live goes in one wire and to lock, the opposite one.
simples
RE: Testing driver side central locking unit and wiring - Welshy_Pete - 09-07-2013
So just put the red probe on the red power feed wire. Then the black probe on all the other colour wires?
Also while testing that try using the central locking to see if any changes happen on the feed to?
RE: Testing driver side central locking unit and wiring - Welshy_Pete - 14-07-2013
I got the central locking working in the end. I put anther door piller loom in. So that sorted out afew things. The central locking still wouldn't work. So I got anther motor connected it to the loom connector and it worked fine.
You could lock the doors on the driver side only manual with the key due to that motor not working. But could open and close the others once the driver door was locked using the remote. But the driver side wouldn't with the remote due to the motor.
So now I've fitted a new motor on the car its working great now.
RE: Testing driver side central locking unit and wiring - Piggy - 14-07-2013
good feelings
RE: Testing driver side central locking unit and wiring - Welshy_Pete - 15-07-2013
(14-07-2013, 08:03 PM)Piggy Wrote:
good feelings
Sure is