306oc - Peugeot 306 Owners Club & Forum
tools needed please - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: tools needed please (/showthread.php?tid=15044)



tools needed please - pugjohn306 - 28-06-2013

Guys bit of a long shot but could someone be able to list all the required tools ill need to do a head gastet on a 1.4 8v please....no silly awnsers i need asap cheers..


RE: tools needed please - Chris_90 - 28-06-2013

A good socket set with a good range of spanners and sockets, and what ever tool needed for head bolts maybe a big toques bit or it might just be a nut head but not sure on the 1.4.

Dont think you need any special tools. Oh a toque wrench to toque the head bolts up


RE: tools needed please - pugjohn306 - 28-06-2013

(28-06-2013, 09:38 AM)Chris_90 Wrote: A good socket set with a good range of spanners and sockets, and what ever tool needed for head bolts maybe a big toques bit or it might just be a nut head but not sure on the 1.4.

Dont think you need any special tools. Oh a toque wrench to toque the head bolts up

Cheers i know the head bolts are like stars lol


RE: tools needed please - 4WayDiablo - 28-06-2013

They're like t50 or something stupid torx.

Most should be found in the halfords advance kits

Oh and a hammer.... The bigger the better


RE: tools needed please - pugjohn306 - 28-06-2013

(28-06-2013, 10:03 AM)4WayDiablo Wrote: They're like t50 or something stupid torx.

Most should be found in the halfords advance kits

Oh and a hammer.... The bigger the better

Lol ill use my head as the hammer nothing in there anyway lol..


RE: tools needed please - Jonny81191 - 28-06-2013

A breaker bar for your sockets or failing that some steel tube that fits over your t bar or ratchet (last resort as you don't wanna put silly pressure on ratchets)


RE: tools needed please - Niall - 28-06-2013

T55 socket for the head bolts (may need a long one like http://www.lasertools.co.uk/item.aspx?item=644)

Torque wrench and angle gauge and a good socket set.